1) Press F + 1 Keys
2) Password is the current date: MMDDYYYY
3) Down. Communication.
4) Password is the current date: MMDDYYYY
5) Down. Down. LAN Parameters
6) LAN Type -> Static
7) IP Address -> 192.168.XXX.13X
8) Subnet Mask -> 255.255.255.0
9) Gateway -> 192. 168.XXX.1
10) DNS1 -> 192.168.XXX.1
11) DNS2 -> 8.8.8.8.
1) Press F + 1 Keys
2) Password is the current date: MMDDYYYY
3) Down. Communication.
4) Password is the current date: MMDDYYYY
5) Down. Down. ECR Comm Type
6) Ethernet
7)Port 10009
8) TCP/IP
1) Press F + 1 Keys
2) Password is the current date: MMDDYYYY
3) System Settings
4) Password is the current date: MMDDYYYY
5) Down. Database
6) Clear Database
7) Are you sure? Yes
8) All
9) Wait for device to clear database and reboot.
IMPORTANT: A remote load will not work if there is an active batch on the S300. Please get a list of active transactions on the chip reader, send to ISO/Processor to capture the transactions manually and clear the database on the chip reader (see above) before attempting the remote load.
1) Press F + 1 Keys
2) Password is the current date: MMDDYYYY
3) System Settings
4) Password is the current date: MMDDYYYY
5) App Management
6) App Update
7) Wait for device to download the update and reboot.
1) Press F + 1 Keys
2) Password is the current date: MMDDYYYY
3) System Settings
4) Password is the current date: MMDDYYYY
5) App Management
6) Configuration
7) URL: t.paxstore.us
8) Port: 9080
9) Reboot the chip reader.
IMPORTANT: Do not confuse this with a remote load. This is only to update the firmware on older PAX S300s.
1) Unplug the power line to the S300
2) Plug the power line back and repeatedly press the menu button until a menu appears
3) Select Remote Download
4) Select New Download
5) Select TCP
6) Enter the IP: 216.238.144.195
7) Enter the Remote Port: 8582
8) Enable DHCP: Yes
9) Enter the Terminal ID: 30030030
10) Press the green button to initialize the firmware update.
11) Reboot the device once after the download has completed.