1) Press the white circle key ⦿ on the top right of the terminal
2) The default password is 3300
3) Select Control Panel
4) Select Terminal Settings
5) Select Comm Means
6) Select Ethernet
7) DHCP -> Off
8) IP Address -> 192.168.XXX.13X
9) Subnet Mask -> 255.255.255.0
10) Gateway -> 192. 168.XXX.1
11) DNS1 -> 192.168.XXX.1
12) DNS2 -> 8.8.8.8.
13) Press the red X button to exit. You will be prompted to save the changes.
1) Press the white circle key ⦿ on the top right of the terminal
2) The default password is 3300
3) Select Control Panel
4) Select Terminal Settings
5) Select Comm Means
6) Select Ethernet
7) Select Ping at the bottom of menu
8) Enter in an IP address or url to ping. Typically we can try the Hotsauce router and Google.
1) Press the white circle key ⦿ on the top right of the terminal
2) The default password is 3300
3) Select Control Panel
4) Select Software Management
5) Select Evolution
6) Select Remote Upgrade
7) Select Start Remote Upgrade
8) Wait for the chip reader to complete the download and reboot.