C1 & C2 Campus

C1 & C2 IC

Both days:

1. To take the attendance of the instructors in individual base campus assigned and update Duty LI

2. To be the main focal point for C1 ops room in Camp 1 and 2 during course.

3. To collect extra food rations and separate them according to MRE/Dry Biscuits AND Bread/Fruits in the Toyogo box prepared at campus by Team 14.
   By Friday, if no one consumes the bread/fruit, to throw them away.

4. To inform H/LI (T) Jaz after every MOC course, in an effort to collect data on these issued items:
   - Extra buff and sleeves issued per course
   - Number of buff and sleeves thrown away or unwanted per course

PPJ IC / Inpro & Outpro IC

Inpro: BV Set

PPJ IC
Both days: Liaison point between boats and C1 & C2 instructors at PPJ. Be at PPJ by 0900hrs as inpro begins at 0915hrs.

Inpro/Outpro IC
Day 1 of first MOC course of the week: To take 12.30pm EH boat out from Camp 2 to PPJ to receive C2 certs from RAC IC for both MOC in the same week’s certs.

Day 1:

1. To follow Camp 2 watches into Camp 2 to collect and counter-check on Camp 2 nominal rolls and pass to C1 Ops Room.

2. Take C2’s watch photos and upload by 3pm.

Both days:

1. To update Ops Room & PM once Inpro/Outpro of C2 course is done. To inform nurses at RAC to inpro together with them.

2. The liaison with PM and HOTO with teachers for Camp 1 & 2 watches for Day 1 Outpro and Day 2 Inpro. Catch 3.30pm boat out to assist in Outpro at RAC.

3. If buses come earlier in the morning before Inpro, assist RAC IC to guide the disembarked participants to the respective tentages.

Day 2:

1. Follow Camp 2 watches into Camp 2, and SB will pick up to send to C1 when sending crafts to Camp 2;
   OR take 10am boat from PPJ to Camp 1.

RTC in Bus Bay, Usher and Runner at RAC

Inpro & Outpro: Traffic Vest & BV Set

RTC in Bus Bay

Location: Bus Bay by 0830hrs during inpro.

1. Control bus movement at Bus Bay. Keep participants on the bus until Usher gives green light to proceed.

2. Both days outpro: Get ready to manage the buses in the Bus Bay by 1630hrs.

Usher

Location: Entrance gate between Training Shed B & C by 0830hrs during inpro.

1. Manage bus disembarkation point and guide pax to their respective temperature screening area, according to Camp 1 & 2 and RAC watches.

2. To inform Teacher to report to the PM after taking temperature.

3. Inform RTCs in Bus Bay to allow more pax to alight during inpro.

4. Usher pax to the buses at Outpro.

Usher & Runner for PM

Location: Tentage

1. Ensure number tags are placed and pax are allocated properly by 0820hrs.

• RAC watches: Training Shed A & B

• Camp 1 watches: 3-4

• Camp 2 watches: Tentages 2-3

2. Manage participants at respective tentages in their respective watches while waiting for all pax to arrive at inpro or waiting for bus & teacher at outpro.

3. To send / look for pax with medical condition between PM and respective tentage area.

Thermal Scanner + Isolation IC

Inpro & Outpro: BV Set

• Thermal Scanner + Isolation IC = (1 x RAC SB) – RAC

• Standing thermal scanner = (1 x Ubin SB) – C1

• Handheld IR thermometers = (2 x Ubin SB) – C2 Handheld IR thermometers

3x Ubin SB:

1. Prepare 6 infrared handheld thermometers that can be found in RAC cupboard with vests by 0830hrs.

2. If SB #1 gets activated, it is ok to have 2 lesser infrared handheld thermometers.

3. To ensure that all participants clear temperature-taking. Bring participant to holding area and rest for 10 minutes before 2nd round of temperature-taking. If participant fails temperature-taking again, direct participant to isolation area and inform MST and PM.

4. Instruct pax to head to tentages once all medical issue of the class has been highlighted.

5. Take C1 watch photos and upload by 3pm.

6. To take the 10am boat in for all Ubin SB.