Embedded Files
Station III:
LEFT PEDAL (A)
LEFT PEDAL (A)
Press down and release, WITH LEFT FOOT, the first pedal from the left: the clamps of the turntable will retract. Do it again: the clamps will expand. If you press the pedal prior to the end of the stroke and release, the clamps may be stopped in any position.
Middle Pedal (B)
Middle Pedal (B)
Open the bead breaker arm. Press down and hold, WITH LEFT FOOT, the second pedal from the left: by doing this you operate the bead breaker blade and the arm will move towards the machine. Release the pedal: the bead breaker blade will retract.
Right Pedal (C)
Right Pedal (C)
Press down and hold, WITH RIGHT FOOT, the first pedal from the right: the turntable turns clockwise (7 or 7/14 rpm). Lift the pedal and the turntable turns counter-clockwise (7 rpm).
Bead Sealer & Airing tire back up
Bead Sealer & Airing tire back up
On the left of the machine is one more pedal (with two settings):
Press bead seater/infl ator pedal on left side of the machine (2, Fig. Fig. 4.1-1): air will come from inflation hose end only.
F1. Press bead seater/infl ator pedal (1, Fig. 4.1-3) on left side of the machine half way down: air will come from infl ation hose end only (2, Fig. 4.1-3).
F2. Press bead-seater pedal (1, Fig.4.1-3) down swiftly to get air blast from the turntable jets (3, Fig.4.1-3).
m1620operatorsmanual.pdfReport abuse