The Proper Way to Use a Drain Snake

This method is prevalent to the most household. Using a drain snake is more effective when a single person would follow the process on how to use it properly. It is swift, easy and economical, the reason why homeowners have this tool available all the time at home, however, the basic knowledge about how to prevent the clogged drain is to practice a good habit of segregating the trash away from the sinks.


Best Practices to Avoid a Clog

Always Clean the Waste Disposal

After using waste disposal, run cold water in large quantity as the machine cuts the waste. Let the water run for a few minutes after you turn off the disposal. This precaution flushes waste from the small diameter sink drain pipe and into the more considerable main drainpipe, which is prone to clog. For severe clog, contact the drain cleaning Sarasota, FL expert to help you clear the clog in the pipes.


Avoid Putting Anything Down Your Drain

The DIY enthusiast will often flush with drainage materials. The most common culprit is plaster or wallboard compounds, which seem to be insufficiently drained but can harden in drainpipes and clog them. To avoid these clogs, do not throw leftover building materials in sinks.


Use a Strainer

A clogged kitchen sink is usually the result of debris entering the drain. Use a sink filter to prevent trash and small items from entering the gutter.

If the clogged drain is getting severe, then it is time to apply the method of using a drain snake.


The Necessary Steps of Using the Tool

· Push the end of the snake into the opening of the ditch. Make sure to rotate the handle on the drum containing the coiled-up snake.

· Push the snake vigorously into the drain until you feel resistance.

· Apply pressure when cranking the handle so that it bends around the tight curve in the trap under the sink. After rotating the angle, the snake usually slides until you hit the clog.

· Twist the snake against the blockage until you feel it clears the clog in the pipe.

· Rotating the end of the snake to attach to the clog is important and spins it or chops it. For hard clog objects, the auger's head interferes with the item. If you do not feel the auger slipping and rotating more easily, pull the auger out of the drain - you will probably remove the clog with it.

· Be mindful of running a cycle of water full force for a few minutes to be sure that the drain gets clear.

· There were times, the clog flushes down the drain, or the clog comes out attached to the snake.