A furnace produces heat to make sure the entire home or area is warmed. It is especially useful during cold months. However, there are times that it may not be producing heat. In this article, I am going to share the two most common reasons why your furnace is not producing heat along with the simple guide or process of solving it.
This case is a bit silly, but sometimes, this is the reason for some furnaces not producing heat. We expect it to keep us warm, but did we turn on the thermostat? Make sure your thermostat is at least 5 degrees higher than your room temperature. Before you call for a service provider, check this matter first.
Here's how you can conduct a simple check up on your thermostat:
1. First, check your thermostat's battery. If your thermostat runs on batteries, it is better to check it. Change batteries at least once a year or as often as needed.
2. Make sure your thermostat is clean by opening it. You can remove dust and any debris that is clogging your thermostat by gently blowing it.
3. If your system is on a timer, check the date and time settings. Make sure the settings on the programmable or electronic thermostat model is correct.
4. Try turning off your breaker. Then, check the fuse while the breaker is off.
If the above mentioned simple methods still do not fix the problem or if you are not sure how to do it, call a service provider like the AC repair Fort Lauderdale, FL. They are knowledgeable enough to diagnose the problem and fix it in no time.
If you have checked the thermostat or you already tried to dial-up and down a few degrees but still no heat from the furnace, it is time to check the circuit breaker or the fuse.
First, go to the breaker panel of your home. Look for the control circuit connected to your furnace. Check if it is turned off or in the middle position.
1. Test your circuit breaker manually by flipping it back and forth (on and off).
2. Once you flip it, make sure it stays "On" and does not flip back off or stay in the middle.
By doing the above-mentioned, your breaker will be reset. This should do the trick to make your furnace work. However, if the problem continues then there must be a different cause as to why it is not producing heat.