Solve Slow Drain in the Toilet

How to Solve Slow Drain in the Toilet

There are many suggestions online that will give you different answers. In the meantime, try to figure out which advice is most appropriate. You may have tried many remedies, and none of them have been successful. Some procedures require precautionary steps that you need to follow strictly so you can come up with a great solution.


What Causes Slow Drain in Toilet?


Clogged Toilet. The foremost requirement of a standard functioning bathroom is a clean drainage system. Without any blockage creates an effective flush and thus makes the toilet flow smoothly and quickly descend into the sink. If your toilet is clogged, usually, debris accumulation during flushing can become slow and stagnant.


Most people make the mistake of flushing out items that do not fit in the toilet. The toilet paper, kinds of cotton, wipes, hair build-ups, floss, and others can clog in the pipes, though only to some degree. When these items accumulate in drains, it can cause severe damage or blockages. Blocks can prevent water from flowing freely, making flushes slow and sluggish.


DIY of Toilet Clog


You may have tried different steps to resolve this issue, but if you have not fixed the slow draining toilet, even though you tried all options available, ask the help of a professional plumber. To solve this problem, please visit the drain cleaning Hoover, AL service provider.


Check the Tank


First of all, carefully check your tank and try to figure out the problem. When you find the problem, then lift the tank cap. Then check the chain connecting the flushing handle to the flapper.


Use a Hydrochloric Acid


Before using hydrochloric acid, wear protective gear like gloves, masks, and eye protection. It would help if you used a sponge to remove the excessive water. Afterward, check the rim holes for proper water flow.



Clean Toilet Brink with Household Products


It would help if you placed the little dishwashing liquid in the overflow pipe. After that, you have to wait 10-15 minutes for the efficient cleaning of all toilets, all connecting pipes. For better cleaning, flush the bathroom thoroughly.


Doing this trick, heat a gallon of water in a pot. Suppose the water reaches its boiling point, set it aside. Pour a cup or two of dish soap into the sink. Let it sit for half an hour. Get the hot water; pour it well into the drain without allowing it to overflow.


Other Options


As for other options, tools can be available at any cost. You can grab a plunger, an auger, or drain snake, depends on the procedures you ought to try. If you have tried these tools before, you know how to fix the issue, but if you need supervision, ask for the help of an expert.