Most homeowners are getting used to using chemicals. Some would prefer to use tools that they bought in the hardware store and supermarkets. If you are one of those DIY enthusiasts, you probably knew all the procedures like a specific individual who prefer to exert their effort to save the day. Even first-timer who chooses to bring up this method can fairly solve the issue of their drain by being sure and careful of the things they need to do. Because in all endeavors, precautionary measure plays a vital role.
As we mention precautionary measures in all aspects, it is always advisable to follow the proper instructions to avoid several problems while doing the procedures. And if ever, the tools did not work in some ways, professional help is what you need. Visit drain cleaning Mountain Brook, AL for further assistance.
Plunging can be successful, although it depends on the nature of the clog and the design of your drain. The plunger needs absorption to work. So if the clog is very deep and having a buildup of hair, this method may not be effective.
• Add petroleum jelly to the side of the suction pad to tighten it.
• Put enough amount of water so that the plunger pad is submerged.
• Pump vigorously to feel the clog get clear. If using a plunger does not work, change the method in using two plungers.
• Place a plunger on the overflow panel, so that the seal covers it and will give you better absorption.
• Drench the opening of the drain with another plunger.
As a technique, plunging is always worth a test, as the time and costs involved are relatively small.
Using this tool is another inexpensive procedure for fixing a drain. The success rate is high if the issue you are discussing is a clog. Feed the snake until it reaches the clog. You can gain access to the drain through the overflow. Once you have removed the stopper, an alternative route is by opening the drain, after you remove the strainer.
• Turn the handle to return it.
• Check the drain by running the water.
• Make sure the clog are all gone.
• Repeat the process as necessary.
If the tools mentioned above, did not happen to solve the issue, call a professional plumber to assist you.
If you have tried other methods and none of them works, you can do this option though it's a bit nasty.
• You need to unscrew and remove the overflow plate, then remove the stopper.
• To work the stopper, you need to lift and drop a plunger to open and close the drain.
• It is powered by a small lever. If the stopper does not work correctly, it can be stuck in a semi-closed position, preventing the flow of water.
• To position the plunger, you must adjust the lock nuts holding the tool to the threaded rod.
• If the stopper works fine, the issue would be of clog.
Hair buildup and soap scum often accumulate under the drainage filter. So I recommend removing that as well for inspection and access. You can remove filters manually, while others have screws that might need to remove.