All About Slab Leak: Signs and Causes

A leaking slab is a plumbing problem that occurs more commonly. The problem with slab leaks is that they are relatively common but hard to find. Most of the time, they are noticed quite late, and a lot of damage already occurred.

Slab leaks refer to broken pipelines located under buildings such as houses or commercial buildings with concrete floors. Finding them can be difficult, but professionals have the tools to find them without requiring digging much of the property.

Common Sign

A common sign of a slab leak is the water flooding the floor. However, the symptoms are not very obvious, and the hole may go unnoticed for months. A higher gas bill than usual, a heated floor area, or lack of hot water are signs of a slab leaking into the home. Ask help from the expert to help you with slab leaks or diagnose if you suspect one. I highly recommend you call plumbing services Miami-Dade County, FL for slab leaks.

Causes of Slab Leak

Corrosion

Pipes installed underground are in direct contact with the ground. Additionally, the water running inside the tube indicates electrolysis. This indication results in corrosion inside and out of the pipe leading to holes.

Hot water pipes are more likely to be affected by the chemicals in the soil with heat. Power lines running under the slab can also reinforce metal piping that attracts electrolysis. Older homes are more susceptible to such corrosions. Experts can help detect these issues in time to prevent corrosion.

Abrasion

As the water moves through the pipes, expansion, shrinkage, and vibrations can occur. This activity causes the pipeline to rub against gravel, concrete, or other material made by the foundation. This constant friction can grate the pipe until a leak occurs.

Insulated pipes that sustain the supports are more likely to vibrate and cause scrape. Poor adhesion and cheap joints can also lead to the same issues.

Pressure

High pressure inside the pipes can damage them. Some issues of high pressure may include natural occurrences such as earthquakes or simple improper construction. Too much trouble can start pipes to crush depends on areas affected. The formation of creases in the pipes can prevent even water flow and pressure. A ridge in a tube can lead to uneven wearing out, which leads to a hole in the problem. These are some of the more severe cases of slab leaks and can lead to massive leakage in its construction. Washed away soils on the foundation can put the property at risk more damage.

A slab leak is a primary concern of most people in areas with buildings with concrete slab floors, and these leaks can weaken the foundations causing damage to the property. Early detection of slab leaks is a must to take critical steps.