2016 Memorial Day Trip

People:

Car 1 (Joe's Truck, leave 0800 Friday):

    Joe    

    Matt

    Kyle 

    Tristan

Car 2 (UCAR, Fri 1600):

    Jason (Fri >1530)

    Doug

    Jane  (Fri > 1600)

    Adrian

Car 3 (UCAR, Overnight Trip, Sat -> Sun):

    Josh   (Sat -> Sun/Mon)

    Sylvia (Sat -> Monday)

    Eli (Sat -> Sun)

    Andrew (Sat -> Sun)

Car 4 (Chris Jeep, Saturday):

    Chris 

    Oliver 

https://www.wunderground.com/us/wa/ellensburg

Supplies:

• Sleeping Arrangements

  • Joe bringing tent for overflow

  • 9 bed in building

    • lower level = 2 + 2+ 1

    • coude = 2

    • upstairs = 2 / 3

  • total overnight saturday ~ 14 (not including Chris & Oliver)

TODO:

• re-install kitchen faucet (sink extender work done back in seattle)

• clean roof and apply sealant to critical areas (if dry)

• Gravel walkway to shutters

• cleanup construction supplies

• move left over solar panels to shed

• add building temp metrology

Food:

    Breakfast: Cereal

    lunch:  sandwiches

    dinner:  grill chicken or roast?

Home Depot:

• lumber for shelves 8" - 10" wide x 6'

  • decking - 9' x 4' with (use 8' in square pattern)

• cover 8" diameter

  • copper piping for air system

  • L flashing

  • chlorine tabs

  • Hole saw kit

  • Nut and bolt assortment

  • Look for solar panel mount taps?

  • Duct tape

  • Teflon tape

  • Pipe bender

  • 1/4" tubing

Other :

• • sand or crush 1yard (trailer or bag from hd)

  • 2' x 5' desk from Joe's Office

  • Dorm Room to Right power outlets

  • Welder & plasma cutter

From Office:

• shop vac

• Telescope Back End

• Evora

• Filter Wheel

• RPi's 2 & 3

• Cloud Camera

  • power supply for uTV.

  • Solder station

Tasks:

• • Tristan - Evora

    • Test GUI on sky

    • Test filter wheel

    • Try to break GUI (e.g. unplug camera when server is running)

  • Doug - TCC

    • compile old software on new TCC

    • compile new software on new TCC

    • can we move hardware???

• Jakob / Matt - Day Room Shutters

  • Winch install

  • Tie 3 x shutters together with steel cross brace

  • Mount winch on secured standoff

  • New cable and pulley's.

• Matt / Joe - Resolder Telescope Paddle

  • Jane - Cable Management

  • Eli - Dome Encoder

    • Install hardware

    • work on coding

    • goal - report azimuth angle of open dome

    • home pos label till we can get home switch

  • Jason / Joe - Redo Rat's Nest

  • Josh / Adrian - WebCam's

    • Install North Facing Camera

  •  Pull IP cams and return to UW for refurbishment.

  • Run 100' Ethernet to S facing cam

  • Reset Firmware to run on wired with proper labels

• Kyle - Documentation

  • Create a block Diagram of building

  • What needs to be done to be ready for spectrograph

    • where should it be mounted

    • air runs

    • power runs

  • Runs for Solar (Josh)

  • Runs for building metrology

• Joe / Jason / Sylvia - Review MRO Checkout Procedures & Camera Documentation

McMaster list:

Back end bolts (1/2" x 1" 24tpi shcs)

Socket cap set

1/4 push to connect check valve

8-32 x 1/4 & 3/8 for camera latches

latch for filter cover (destaco 323?)

Shopping list:

Zip ties 

Tiny screwdrivers

Aluminum foil

Two full water bottles

Hd list 6/12

• 1/4" Check valve

• 1" black poly hose