Embedded Files
For the Rollo wireless printer. Always ensure that you are connected to the same WiFi name and the same band 2.4Ghz or 5Ghz.
This is not an official Rollo support site, for the official support site, please visit: support.rolloprinter.com
⚠ WiFi Checklist (to ensure stable wireless connection) ⚠
How many Wifi names do you have: Ensure your devices including Rollo are connected to the same WiFi name
Is your Wifi Frequency/band Split between 2.4ghz and 5ghz or Combined?: If you have a combined WiFi frequency/band please split your band between 2.4ghz and 5ghz
Static IP or Dynamic IP: Sometimes wireless routers do tend to reassign IP addresses to your devices, if this happens, you will lose connectivity to your printer, so it's best to assign static IP to your Rollo printer.
Distance: Place Rollo within several feet and no significant obstructions
In order to change the speed and darkness on an X1040, you need to access the printer server.
Please do the following:
• Press and hold the WiFi LED for 2-3 seconds
• The printer will produce a network test, look for IPV4 address and take note of it
• Open your browser and type your IPV4 address on the address bar followed by ":631" i.e 192.168.1.3:631
• Click Printing defaults and adjusts your speed and darkness (bump it up and down till you get the best output)
• Save
Page updated
Google Sites
Report abuse