Ohlins H2R Rear Shock

I got the H2R spec rear shock which meant the clevis, dogbone and linkage with bearings were all need to be replaced. 

If you did the H2 Ohlins shock, you only need the clevis as the rest of the part numbers are the same. 

The yellow beauty.

Preload adjuster

Other anncillary parts. 

I have never done this before. Saw it on youtube and gave it a try. It worked. A decent metal bench vice with correct size sockets will do the job.

Never use a hammer. 

The preload adjuster requires a mount from Akra if you are using Akra's carbon hanger. Not sure why - but had a very long waiting time. WRS arranged this. 

Also not shown here, the hydraulic cable requires a O ring from Kawa to stay in place at the Akra mount.