ffserver.conf

# Port on which the server is listening. You must select a different

# port from your standard HTTP web server if it is running on the same

# computer.

Port 8090

# Address on which the server is bound. Only useful if you have

# several network interfaces.

BindAddress 0.0.0.0

# Number of simultaneous HTTP connections that can be handled. It has

# to be defined *before* the MaxClients parameter, since it defines the

# MaxClients maximum limit.

MaxHTTPConnections 2000

# Number of simultaneous requests that can be handled. Since FFServer

# is very fast, it is more likely that you will want to leave this high

# and use MaxBandwidth, below.

MaxClients 1000

# This the maximum amount of kbit/sec that you are prepared to

# consume when streaming to clients.

MaxBandwidth 1000

# Access log file (uses standard Apache log file format)

# '-' is the standard output.

CustomLog -

# Suppress that if you want to launch ffserver as a daemon.

NoDaemon

###########################################

# Definition of the live feeds. Each live feed contains one video

# and/or audio sequence coming from an ffmpeg encoder or another

# ffserver. This sequence may be encoded simultaneously with several

# codecs at several resolutions.

# You must use 'ffmpeg' to send a live feed to ffserver. In this

# example, you can type:

# ffmpeg http://localhost:8090/feed1.ffm

# ffserver can also do time shifting. It means that it can stream any

# previously recorded live stream. The request should contain:

# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify

# a path where the feed is stored on disk. You also specify the

# maximum size of the feed, where zero means unlimited. Default:

# File=/tmp/feed_name.ffm FileMaxSize=5M

File /tmp/feed1.ffm

FileMaxSize 200K

# You could specify

# ReadOnlyFile /saved/specialvideo.ffm

# This marks the file as readonly and it will not be deleted or updated.

# Specify launch in order to start ffmpeg automatically.

# First ffmpeg must be defined with an appropriate path if needed,

# after that options can follow, but avoid adding the http:// field

#Launch ffmpeg

# Only allow connections from localhost to the feed.

ACL allow 127.0.0.1

</Feed>

###########################################

# Now you can define each stream which will be generated from the

# original audio and video stream. Each format has a filename (here

# 'test1.mpg'). FFServer will send this stream when answering a

# request containing this filename.

# coming from live feed 'feed1'

Feed feed1.ffm

# Format of the stream : you can choose among:

# mpeg : MPEG-1 multiplexed video and audio

# mpegvideo : only MPEG-1 video

# mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)

# ogg : Ogg format (Vorbis audio codec)

# rm : RealNetworks-compatible stream. Multiplexed audio and video.

# ra : RealNetworks-compatible stream. Audio only.

# mpjpeg : Multipart JPEG (works with Netscape without any plugin)

# jpeg : Generate a single JPEG image.

# asf : ASF compatible streaming (Windows Media Player format).

# swf : Macromedia Flash compatible stream

# avi : AVI format (MPEG-4 video, MPEG audio sound)

Format mpeg

# Bitrate for the audio stream. Codecs usually support only a few

# different bitrates.

AudioBitRate 32

# Number of audio channels: 1 = mono, 2 = stereo

AudioChannels 1

# Sampling frequency for audio. When using low bitrates, you should

# lower this frequency to 22050 or 11025. The supported frequencies

# depend on the selected audio codec.

AudioSampleRate 44100

# Bitrate for the video stream

VideoBitRate 64

# Ratecontrol buffer size

VideoBufferSize 40

# Number of frames per second

VideoFrameRate 3

# Size of the video frame: WxH (default: 160x128)

# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,

# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,

# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,

# hd1080

VideoSize 160x128

# Transmit only intra frames (useful for low bitrates, but kills frame rate).

#VideoIntraOnly

# If non-intra only, an intra frame is transmitted every VideoGopSize

# frames. Video synchronization can only begin at an intra frame.

VideoGopSize 12

# More MPEG-4 parameters

# VideoHighQuality

# Video4MotionVector

# Choose your codecs:

#AudioCodec mp2

#VideoCodec mpeg1video

# Suppress audio

#NoAudio

# Suppress video

#NoVideo

#VideoQMin 3

#VideoQMax 31

# Set this to the number of seconds backwards in time to start. Note that

# most players will buffer 5-10 seconds of video, and also you need to allow

# for a keyframe to appear in the data stream.

#Preroll 15

# ACL:

# You can allow ranges of addresses (or single addresses)

#ACL ALLOW <first address> <last address>

# You can deny ranges of addresses (or single addresses)

#ACL DENY <first address> <last address>

# You can repeat the ACL allow/deny as often as you like. It is on a per

# stream basis. The first match defines the action. If there are no matches,

# then the default is the inverse of the last ACL statement.

# Thus 'ACL allow localhost' only allows access from localhost.

# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and

# allow everybody else.

</Stream>

###########################################

# Example streams

# Multipart JPEG

#<Stream test.mjpg>

#Feed feed1.ffm

#Format mpjpeg

#VideoFrameRate 2

#VideoIntraOnly

#NoAudio

#Strict -1

#</Stream>

# Single JPEG

#<Stream test.jpg>

#Feed feed1.ffm

#Format jpeg

#VideoFrameRate 2

#VideoIntraOnly

##VideoSize 352x240

#NoAudio

#Strict -1

#</Stream>

# Flash

#<Stream test.swf>

#Feed feed1.ffm

#Format swf

#VideoFrameRate 2

#VideoIntraOnly

#NoAudio

#</Stream>

# ASF compatible

Feed feed1.ffm

Format asf

VideoFrameRate 15

VideoSize 352x240

VideoBitRate 256

VideoBufferSize 40

VideoGopSize 30

AudioBitRate 64

StartSendOnKey

</Stream>

# MP3 audio

#<Stream test.mp3>

#Feed feed1.ffm

#Format mp2

#AudioCodec mp3

#AudioBitRate 64

#AudioChannels 1

#AudioSampleRate 44100

#NoVideo

#</Stream>

# Ogg Vorbis audio

#<Stream test.ogg>

#Feed feed1.ffm

#Title "Stream title"

#AudioBitRate 64

#AudioChannels 2

#AudioSampleRate 44100

#NoVideo

#</Stream>

# Real with audio only at 32 kbits

#<Stream test.ra>

#Feed feed1.ffm

#Format rm

#AudioBitRate 32

#NoVideo

#NoAudio

#</Stream>

# Real with audio and video at 64 kbits

#<Stream test.rm>

#Feed feed1.ffm

#Format rm

#AudioBitRate 32

#VideoBitRate 128

#VideoFrameRate 25

#VideoGopSize 25

#NoAudio

#</Stream>

###########################################

# A stream coming from a file: you only need to set the input

# filename and optionally a new format. Supported conversions:

# AVI -> ASF

#<Stream file.rm>

#File "/usr/local/httpd/htdocs/tlive.rm"

#NoAudio

#</Stream>

#<Stream file.asf>

#File "/usr/local/httpd/htdocs/test.asf"

#NoAudio

#Author "Me"

#Copyright "Super MegaCorp"

#Title "Test stream from disk"

#Comment "Test comment"

#</Stream>

###########################################

# RTSP examples

# You can access this stream with the RTSP URL:

# rtsp://localhost:5454/test1-rtsp.mpg

# A non-standard RTSP redirector is also created. Its URL is:

# http://localhost:8090/test1-rtsp.rtsp

#<Stream test1-rtsp.mpg>

#Format rtp

#File "/usr/local/httpd/htdocs/test1.mpg"

#</Stream>

###########################################

# SDP/multicast examples

# If you want to send your stream in multicast, you must set the

# multicast address with MulticastAddress. The port and the TTL can

# also be set.

# An SDP file is automatically generated by ffserver by adding the

# 'sdp' extension to the stream name (here

# http://localhost:8090/test1-sdp.sdp). You should usually give this

# file to your player to play the stream.

# The 'NoLoop' option can be used to avoid looping when the stream is

# terminated.

#<Stream test1-sdp.mpg>

#Format rtp

#File "/usr/local/httpd/htdocs/test1.mpg"

#MulticastAddress 224.124.0.1

#MulticastPort 5000

#MulticastTTL 16

#NoLoop

#</Stream>

###########################################

# Special streams

# Server status

Format status

# Only allow local people to get the status

ACL allow localhost

ACL allow 192.168.0.0 192.168.255.255

#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico

</Stream>

# Redirect index.html to the appropriate site

URL http://www.ffmpeg.org/

</Redirect>