Create a personal nameplate on OnShape to be printed on the the 3D printer.

1. Include some feature that defines an interest of yours (Sport, Hobby, etc...)
2. Volume:
   1. 4 cubic inches maximum of Model material
3. Wall thickness
   1. Minimum wall section .0625"
   2. Maximum wall section .125" (Try to avoid using maximum when possible)

Some constraints on your model that are inherent to the Stratysys 3D Printer in Brophy's Innovation Commons can be found at this link.

1. Maximum size 6” x 6” x 6”
2. Must show first, last, or full name. Shortened first names or nicknames are acceptable.
3. Must include at least 1 moving/assembled part or a complex shape approved by instructor.
   1. Complex Shape Options:
      1. Loft connecting at least 2 sketches
      2. Sweep following a complex spline
   2. Moving Part Options
      1. Hinged design
      2. Wheels and axles moving independent of the body.
   3. Assembled Part Options
      1. Multiple parts (4 or more) that are designed with proper clearance such that they can be assembled without modification
4. Must be free standing and able to be read from the side (letters must be part of free-standing element)

1. A rough sketch of concept must be approved by instructor prior to modeling in OnShape.
   1. Include statements on how you are going to meet each constraint.
2. A completed 3D model that meets all constraints
3. 3D Printed Part.
   1. Click Here for Instructions to Export your Onshape Model as an STL File and Use the 3D Printer