Embedded Files
You can create a separate drawing for each part or combine them on one drawing.
You can create a separate drawing for each part or combine them on one drawing.
- If you only need one part, create a drawing for that part only, don't waste material
Create a drawing of the parts you want to laser cut. Click Here to view Onshape Drawing Tutorials.
You can create a separate drawing for each part or combine them on one drawing.
If you only need one part, create a drawing for that part only, don't waste material
Video: Create Drawing
Video: Create Drawing
Step by Step Instructions
Step by Step Instructions
Left CLick on the Plus symbol (Insert New Element) in the lower left hand corner
2. Left CLick on the Plus symbol (Insert New Element) in the lower left hand corner
3. Create a drawing with the settings as shown on the right
Left Click on "Custom Template"
Select Size "A" from the Pull Down Menu
Left click on Border "Do not include"
Left click on Titleblock "Do not include"
4. Left Click on OK
5. Left Click on the part you want to add to the drawing
6. Select the appropriate View Orientation to create a flat view of the part
6. Select the appropriate View Orientation to create a flat view of the part
7. Make sure Wiew Scale is set to 1:1
8. Place part in an appropriate spot on a drawing, usually in a corner.
9. Left click on the Projected vew tool (If shaded Gray) to turn it off.
9. To add other parts, left click on the Insert view tool and repeat steps 5-9.
Click Here to learn how to Export Drawing to Corel Draw to prepare for Laser Cutting
Report abuse