StellarNet Black-Comet Spec

Introduction:

Install and run StellarNet Black-Comet Spec device on new computer.

Important Notes:

Installation Notes:

Spectrometer Driver installation for computers with Win7-64bit or Win8-64bit

Select my computer properties to determine if you have a 64-bit operating system.

SWDriver64 installation is ok with or without spectrometer attached via USB...

1. Open the SWDriver13 folder then Click "SWDriver64.exe".This copies files to your hard drive folder c:\SWDriver64

2. Navigate to this folder using Windows Explorer, then select file "Install-SWDriver" and use right click to "Run as administrator"

3. Check "Always trust StellarNet" if prompts appears, After a while a message should indicate driver installation complete.

4. Attach spectrometer via USB cable and see the green LED turn on. The LED indicates spectrometer is ready to operate.

5. Open the "StellarNet Software" folder and install SpectraWiz software by clicking "SWUpdate-Install". A quick start desktop icon will appear.

Procedure:

Steps to run device:

Follow steps 1 and 2 if the device type is not already in your database

1. Follow steps of Add/Edit new device type

2. Enter Name “StellarNet Black-Comet Spec” and Relative Path “StellarNet Black-Comet Spec\StellarNet Black-Comet Spec.lvclass” and click on create/Modify Devicetype.