Hazardous Chemicals Modules
The Research Training and Safety program currently consists of the following Hazardous Chemicals Modules.
Some students and staff working in School of Chemistry laboratories may be required to complete a selection of the modules below before they will be allowed to work with particular chemicals or classes of chemicals. This will be determined by your supervisor, yourself and the lab manager and will be dependent on areas of need for your project and the extent of your experience working in chemistry labs.
You will have completed a module when you have read the SWPs, attended hands-on training (if applicable), and passed the quiz with a satisfactory score.
Haz Chem 1 - Compressed and liquified gases
Haz Chem 1.0 - Gas Cylinders and Pressure Regulators
Module for transport and handling of gas cylinders, and using and testing regulators
Haz Chem 1.1 - Liquid nitrogen
Haz Chem 1.1.1 - Transfer of liquid nitrogen
Safe handling of liquid nitrogen, transfer between small vessels, decanting from bulk storage
NOTE: Haz Chem 1.1.2 - Refilling PLVs has been moved to the Lower Campus Store node - Haz Chem 1.1 - Liquid nitrogen - REFILL PLV F10 v2
Haz Chem 1.2 - Hydrogen
Haz Chem 1.2.1 - Hydrogen balloon filling
Module for the use of hydrogen cylinders and decanting of hydrogen into balloons
Haz Chem 1.3 - Dry Ice
Haz Chem 1.3 - DILMAC Dry Ice Maker
Module for the use of DILMAC dry ice maker
Haz Chem 2 - Flammables
Haz Chem 2.1 – Working with pyrophoric reagents - Overview
Module for general pyrophorics safety, required for working with pyrophoric reagents
Haz Chem 2.1.1 – Organolithium reagents
Required for working with organolithium reagents
Haz Chem 3 – Corrosives
Haz Chem 4 - Toxics and Health Hazards
MODULES UNDER CONSTRUCTION
Haz Chem 3.4 – Perchloric Acid