Add Zone

Now you are ready to start adding in the tariff.

Minimum - Use this first box if the tariff has a minimum charge.

Often tariffs run from 0-10 and 10-20 with a rate for the range. Above is the example for this with 30+ a added extra £1.50 per Kilo

Adj Charge - This box will need to be completed to help with the calculation of the rate. When you test the tariff you will see the software will try to use values for line 1 and line 2 if you are testing with 1kg. As in this example you will need to complete the Adj Charge with amount the calculation is out.

So Adj is the Difference between the Actual charge and 31 x 1.50 = £46.50 ( but this should be £11.50 so £11.50 - £46.50 = 35.00)

From Value - This will need to start at 0 and will auto complete from the "Up To"

Up To Value - This box can include the amount or NOT include just click on the button above to toggle between the two.

Amount - Amount for this line

Unit - Unit for this line

Zone - Enter the Zone Letter or Number created from earlier.

Charge Description - Description to show on the job as a charge line.