Embedded Files
Learn to setup a Zebra label printer on Windows 10 and newer.
First, you will need to download the Zebra Setup Utility and install it on the Windows machine.
Head to https://www.zebra.com/us/en/support-downloads/printers/desktop/zd410.html#pageandfilelist_ee4c and then download the Windows "Zebra Setup Utilities" It will be listed under drivers.
Installing the Zebra Setup Utilities:
Click Next
Check the box to accept the terms and click Next
Just click Next on this page.
Again, just click Next.
Once more, click Next.
It should now be installing the utilities
Check the box that says "I have read the above information" and click Next.
Check the box that says "Run Zebra Setup Utilities now" and click Finish.
Click next to preinstall the drivers. (Do not yet plugin the label printer until this is finished.)
Once you click next it will run through and preinstall the printer.
Now, connect the printer to the computer. Then click next on USB
Make sure USB is selected and click Next.
Click "Finish" to finish installing the label printer.
The Zebra printer should now be listed here.
Time to setup the printer in LeafLogix/Printnode.
If the "Printers Active by default" is checked, remove the checkmark and only leave a checkmark by the Zebra and Star printers.
These should be your final settings. Aside from you may have a Star printer checked as well.
Now head to Dutchie Backoffice and make sure that the printer is setup.
Find you printer in the list and click on it. You can search via the printer ID listed in Printnode as well. Next after clicking on the new printer you can configure it.
Printer names are standardized as such.
Station#_Label or Reciept_Med or Rec
Example: 06_Label_M
Ensure you clicked "Save" to save the settings and printer name.
If a new printer was setup you will need to assign it to the station where it is located.
In Dutchie head to Settings>Devices>Registers
From this page select the register you need to assign the printer to and from the dropdown, select the printer. and then click Update.
From this page select the register you need to assign the printer to and from the dropdown, select the printer. and then click Update.
Now simply log into the POS Terminal and run a test run to ensure the labels are printing.
Page updated
Report abuse