Undo the lower locks and leg clips to increase the height and width of the tripos. Re-lock them afterwards. The larger the surface area the more secure it will be.
The dials adjust the fluidity of the head.
Undo lower dial to make sure the shot is horizontal.
Attaching the Jib to the Manfroto 501 tripod
Slot both parts of the jib into each other, then lock them in place with the locking screws.
Remove the head of the tripod with the leveling screw/
Unscrew the metal washer and put the jib through the top.
Attach the metal washer (bowl side up) from below to secure it in place.
Attach the camera head to the other side.
JIB 2.mov
how to assemble a wally dolly:
Attach 2x track with grey track joiners - 2 tracks on either side.
Unscrew screw heads from the cross bar.
Find the two metal pins and line it up to the dolly wheels - make sure it locks in place.
Do the same to the other side and reattach the screw heads.
Place on the track.
Put the tripod onto the holes in the track .
Hook the legs onto the dolly with bungee cords.
6. Loosen the locking screws to lengthen the arms
7. Attach weights.
Safety: Work in pairs with someone at either end, Rest the head on something then put the camera on, put weights on last.