| MAE3 Kit Parts and Rules of Use |
|
|
|
|
|
| Locker
Number:__________ |
|
|
|
|
|
|
| Team
Number:___________ |
|
|
|
|
|
|
| Section
Number:_________ |
|
|
| Qty |
Description |
Qty |
Description |
| 2 |
DC Geared Motor |
2 |
Aluminum sheet metal |
| 2 |
DC 90 Degree Geared Motor |
2 |
Aluminum square tubing |
| 2 |
DC Non-Geared Motors |
1 |
Aluminum angle 1.5 x1.5"x16" |
| 1 |
Solenoid |
1 |
Aluminum angle 0.75"x0.75"x16" |
| 3 |
1/4" Timing Belts (2 small/1 large) Pitch size 0.2"
XL. |
2 |
Aluminum rod D=1/4" L=16" |
| 6 |
O-ring belts (2 small/2 medium/2 large) |
1 |
Aluminum rod D=3/8" L=12" |
| 1 |
36" length O-ring |
1 |
Aluminum rod D=1/2" L=6" |
|
Nylon string 5 ft (Serve yourself) |
1 |
Stainless Steel Shaft (DO NOT CUT!) |
|
Fishing line 5 ft (Serve yourself) |
1 |
Acrylic 0.25"x12"x12" (clear)*** |
|
Electrical Wire 12 ft (Serve yourself) |
2 |
Acrylic 0.25"x12"x16" (colored) |
| 3 |
Large rubber bands |
2 |
2 Acrylic 0.125"x12"x16" (colored) |
| 3 |
Medium rubber bands |
1 |
Delrin 0.25"x12"x1" (white) |
| 3 |
Small rubber bands |
1 |
Sheet of foamcore*** |
| 10 |
Small paper clips |
1 |
Tubes of super glue |
| 1 |
Set of springs (2 small/2 medium/2 large) |
1 |
Robot Power Cord (Must be returned at the end of class) |
| 1 |
Shim stock 1" x 6" x 0.010" |
|
Set Needle nose pliers, Diagonal cutter, (3) Black wrenches,
Sharpie, |
| 2 |
Ceramic ring magnets |
|
and Box cutter(Must be returned at the end of class) |
*
If any piece of paper is detached (even partially) from the acrylic it must
be discarded |
|
(i.e. paper cannot be used as a separate element in the
machine) |
|
|
| **
The insulation must remain on the electrical wire except where the wire end
is attached to another component, |
|
and there up to 0.5” of insulating can be removed. |
|
|
| *** Clear Acrylic 0.25 thick and foamcore are for testing. |
|
|
| If
you include any clear acrylic or foamcore in your final machine, you must
remove an equivalent amount of colored acrylic that was used in making
the part. |
