he following are a set of downloadable CAD files for student use. All AutoCAD files are in 2000 dxf format. If the download link fails, all files can be downloaded from links at the bottom of the page.
Table of diameter of bolt holes for use with the Lasercamm: Bolt | Tapped Hole Diameter (in)
| Clearance Hole Diameter (in)
| 4-40
| 0.076 in. | 0.115 in. | 6-32
| 0.093 in.
| 0.141 in.
| 8-32
| 0.123 in.
| 0.167 in.
| 10-32
| 0.146 in.
| 0.192 in.
| | | | Shaft Size
| Press Fit
| Sliding Fit
|
1/4 '' shaft
| 0.230
then use 0.249 reamer
| 0.230
then use 0.251 reamer
| Table Diameter of 3D printed holes:Hole diameter in inches | 4-40 | 6-32 | 8-32 | 10-32 | 3D Printer | Resolution | Tap | Clear | Tap | Clear | Tap | Clear | Tap | Clear | Makerbot | Low | 0.100 | 0.140 | 0.140 | 0.170 | 0.170 | 0.190 | 0.190 | 0.210 | Standard | 0.110 | 0.130 | 0.130 | 0.160 | 0.150 | 0.180 | 0.180 | 0.200 | High | 0.100 | 0.120 | 0.130 | 0.160 | 0.160 | 0.190 | 0.170 | 0.200
| More information on hole sizes can be found here.
Motor Mounting Instructions:
For detailed instructions on how to mount MAE3 motors, see the MAE3 motor mounting page.
Note: For inventor parts files, google sites tries to use Microsoft Word as the default program. To correct this, click "save" instead of "open" in the download prompt box, and your computer should recognize the Inventor file type and change to the correct default program.
Image Preview
| Download File
| Description | Tips, Tricks, & Background
| |
Download |
Contest Table This is a f3d file containing a complete CAD model of the playing field for this quarter's contest. |
Use this model for your robot animations. Note the files will load better if you extract the whole folder before you load it.
|
|
Inventor: dwg Download
AutoCAD: dxf Download
| Gears
This is a zip file containing all of the pre-drawn gear files for various pitch sizes.
Note: You will need to give extra room between the pitch diameters. If you align the pitch diameters perfectly tangent, it will cause interference issues in the teeth. You can and should rotate and move gears to check proper placements. | TO USE IN INVENTOR: -open .dwg file in inventor -start a separate, brand new .ipt file -start a new sketch in the .ipt file -select all of the geometry in the .dwg -Ctrl+C in the .dwg -Ctrl+V in the .ipt -click to place in the .ipt
For more background on gears, CLICK HERE.
The most common gear sizes for MAE3 are 10, 12 and 16 pitch gears
|
|
Inventor: dwg Download
AutoCAD: dxf Download
| Timing Belt Pulleys
This is file contains various pulleys for use with the robot kit timing belts.
| TO USE IN INVENTOR: -open .dwg file in inventor -start a separate, brand new .ipt file -start a new sketch in the .ipt file -select all of the geometry in the .dwg -Ctrl+C in the .dwg -Ctrl+V in the .ipt -click to place in the .ipt
For more background on timing belts, CLICK HERE.
For more information on other power transmission systems, CLICK HERE.
|
|
Inventor: dwg Download
AutoCAD: dxf Download
| Gear Racks
This is file contains all the rack templates for every gear set and instructions for use.
| TO USE IN INVENTOR: -open .dwg file in inventor -start a separate, brand new .ipt file -start a new sketch in the .ipt file -select all of the geometry in the .dwg -Ctrl+C in the .dwg -Ctrl+V in the .ipt -click to place in the .ipt Image file does not display everything in file.
Recommend reading gear background above, and consider the linear slider problem.
|
|
Download
| Large High Speed (Non-Geared) Motor Mount Template
This file contains the template for mounting this motor.
|
Please read THIS PAGE on mounting motors using Lasercamm parts.
|
|
Download
| Large High Speed (Non-Geared) Motor Inventor Model
This file contains a parts file model of this motor.
|
This is a simple parts file that can be downloaded and placed directly in an assembly.
|
|
Download
| Small High Speed (Non-Geared) Motor Mount Template
This file contains the template for mounting this motor.
|
Please read THIS PAGE on mounting motors using Lasercamm parts. |
|
Download
| Small High Speed (Non-Geared) Motor Fusion360 Model
This file contains a parts file model of this motor. It has been updated for Fall 2021 Quarter |
This is an f3d file that can be downloaded and uploaded to fusion 360. | |
Download
| Geared Motor Inventor Model
This file contains a parts file model of this motor.
|
Some information on the dimensions of the current geared motor can be found at THIS LINK.
|
|
Download | Geared Motor Inventor Model
This file contains a parts file model of this motor |
Some information on the dimensions of the current geared motor can be found at THIS LINK. | |
Download | Solenoid Inventor Model
This file contains a parts file model of this solenoid. |
This model's dimensions may not be fully accurate.
Please account for potential inaccuracies in your design. | |
| Geared Motor Mount Template
This file contains motor hole mounts for mounting on the shaft of the geared motors. | Please read THIS page on mounting motors using Lasercamm parts.
NEVER press fit onto a motor shaft.
Note: this template is good for lasercamming. 3D printers usually print holes slightly small, so sizes will need to be adjusted. See here
|
|
Download | Inventor Inch Template
This file contains a drawing file (.idw) template with inches as the set unit.
|
Use this template for your Inventor CAD assignments
|
|
Download | Inventor Metric Template
This file contains a drawing file (.idw) template with inches as the set unit. |
Use this template for your Inventor CAD assignments | |
|
|
|
|
Updating...
ĉ Daniel Yang, Nov 24, 2013, 2:06 PM
ĉ Daniel Yang, Nov 24, 2013, 2:07 PM
ĉ Daniel Yang, Nov 24, 2013, 2:07 PM
ĉ Daniel Yang, Nov 24, 2013, 2:05 PM
ĉ Daniel Yang, Nov 24, 2013, 2:06 PM
Contest Table_MAE 3 Fall 2021.f3d (2461k) eilan@ucsd.edu, Nov 4, 2021, 2:26 PM
Daniel Yang, Sep 26, 2012, 12:39 PM
Fall 2019 Table.zip (9486k) abilan@ucsd.edu, Nov 7, 2019, 1:16 PM
abilan@ucsd.edu, Nov 7, 2019, 2:43 PM
Daniel Yang, May 4, 2013, 3:52 PM
Daniel Yang, May 13, 2013, 10:40 PM
Daniel Yang, Apr 22, 2013, 3:55 PM
Daniel Yang, Sep 26, 2012, 1:29 AM
Daniel Yang, Sep 26, 2012, 2:41 AM
ĉ Daniel Yang, Sep 26, 2012, 2:47 AM
High Speed Motor_SP19.ipt (236k) Unknown user, May 16, 2019, 8:23 AM
ĉ Daniel Yang, Sep 26, 2012, 3:09 AM
ĉ Daniel Yang, Sep 26, 2012, 3:09 AM
Daniel Yang, Sep 26, 2012, 12:37 PM
ĉ Daniel Yang, Sep 26, 2012, 3:02 AM
eilan@ucsd.edu, Nov 3, 2021, 4:45 PM
Small High Speed Motor_FA21.f3d (99k) eilan@ucsd.edu, Nov 3, 2021, 4:45 PM
Unknown user, Oct 29, 2018, 3:26 PM
Spring 2019 Table.zip (16598k) Unknown user, Apr 30, 2019, 8:28 PM
Daniel Yang, Sep 17, 2014, 5:05 AM
Daniel Yang, Nov 21, 2012, 1:09 PM
ĉ Daniel Yang, Nov 21, 2012, 1:06 PM
fall2018 table.zip (5217k) Unknown user, Nov 26, 2018, 3:17 PM
abilan@ucsd.edu, Nov 7, 2019, 2:26 PM
abilan@ucsd.edu, Nov 7, 2019, 2:26 PM
abilan@ucsd.edu, Nov 7, 2019, 2:31 PM
gears for inventor.zip (229k) Griffin Brunner, Nov 4, 2015, 1:57 PM
Griffin Brunner, Nov 4, 2015, 2:15 PM
|