MAE3 Clock Report Updated for FA18, Reviewed for SP19 Clock Report Each student will turn in a report through gradescope, as well as submitting a printed hardcopy (black and white is ok). The report will be graded on the correctness of the analysis as well as the clarity and quality of the writing. After the cover page, begin with an executive summary. This should clearly explain the objective of the project (ie. what a general reader should take away after reading the report); the entire report should be built around the objective. You should summarize the important results of the timing analysis, such as percentage accuracy of the two calculation methods. A non-technical reader should be able to understand what you did and the results by reading this half-page section. See example of an Abstract taken from MAE 156B; an executive summary is a bit different than an abstract, but both need to be concise and cover key results. In the clock timing analysis, two theoretical methods will be used. The first method approximates the mass of the pendulum as occurring at a single point, and a more accurate method treats the pendulum as a rigid body with a moment of inertia along with its mass. The timing analysis should be done using an Excel spreadsheet. The Excel Tutorial includes a downloadable template to get the clock analysis started and explains how to use named cells. In this report it is not necessary to show the free body diagrams or derive the clock timing equations since they are shown on the instructional webpage (these webpages should be referenced in the report). However, in the robot report at the end of the quarter, free body diagrams and derivations are expected. Don’t
forget to discuss the meaning of your results – why did
we use two different calculation methods? How does each theoretical prediction
compare to the corresponding experimental result and what might cause any
differences? Answering questions like these demonstrates the point of the
analysis you did – the meaning of your results is what the reader wants to see. The clock report should include the following sections:
The writeup should include:
Remember
to cite sources for equations that are not common knowledge. For example, you would not need to provide a source for [mass] = [density]*[volume], but you would need to cite a source for the natural frequency of a pendulum. For this report, simply providing the url next to the equation is enough. In formal reports (in industry, or for other classes) you would likely need to cite sources in a more standardized way. There is an example report (written by TA Michael and group during his undergrad) at the bottom of this page with commentary as to how it relates to the clock report. It is an unrelated topic, but is an example of organization and technical writing style. General Technical Writing In general, engineering reports are critical components of a design report and should:
The reports written in MAE 3 are designed to help you develop good practices for engineering documentation and analysis. Good practices allow others to easily verify your work. Even the lead designer on a project has someone else check their analysis and signoff as reviewer. As discussed in class, good practices in analysis and documentation allow one to avoid errors, and include: Clear Documentation Multiple Methods of Analysis Intermediate Verification Technical writing is different than writing for literature or the humanities. In technical writing you are describing the goals of your work, what you have done and the results of what was done, and what you can conclude from the results. This is a very important skill: throughout your career, you will need to communicate your technical ideas to your colleagues and superiors. The way you write will affect how well others understand your ideas and how others perceive the quality of your technical work. Basic keys for technical report writing:
|
Clock Project >
