FABRICATION: 1.) Drill a clearance hole for a #4-40 screw through both halves of the clamp. WARNING: *** DO NOT tap the hole you drill. The #4-40 screw must move freely through the hole you drill. *** *** Do not drill the hole too close to the body of the clamp. *** *** If you do the head of the clamping screw and nut will not fit! *** 2.) The center hole is cut by the Lasercamm and will clamp onto the metal shaft. DO NOT ream the hole. No actions should be needed. |
Clock Project > Fabrication Steps >