HELP!
1.) The Escapement Gear and Pendulum need to be orientated
correctly to each other. CORRECTION: Check the assembly directions. 2.) The parts on the shaft are pushed together to tightly. CORRECTION: Space the parts out on the shafts. 3.) To much friction. CORRECTION: By hand run the 0.251 reamer through the
bearings. 4.) Still to much friction. CORRECTION: Add up to three of the 1/2" nuts for
weight. 5.) The Gear and the Pendulum are not aligned. CORRECTION: Check to see if the Large Bearing and Short
Shaft are pressed
into the Upright correctly. Remake the Upright. 6.) Still doesn't work. CORRECTION: Ask for help. |
Clock Project > Assemble The Clock >