Embedded Files
The frame assembly of Go³ (model AE2-310EU v3) is the same as Go² except the 4 vertical 2040 extrusions can be higher for easy enclosure.
Please download the manual PDF of Go2 in SK-Go Github repository
With the Go³ XY kit, it's a good timing for you to turn your Go² into an easy-enclosed frame with some longer 2040 extrusions. In this manual the higher Go³ frame is used.
For the wirings and firmware configs,
please take the Cube Wirings and Cube firmware as references.
Model name
Model name
AE2-310EU v3, aka Go³
AE2: Aluminum Extrusion 2020
310: build volume 310x310x350 mm^3
EU: European standard aluminum extrusion
v3: Version 3
Hardware types & legends
Hardware types & legends
Hardwares labeled in "bold fonts" are located at this side, facing to you.
Hardwares labeled in "light fonts" are located at the other side.
Hardwares labeled in (parentheses) are optional. Usually they are M3 washers which can be ignored on hard steel surfaces.
Arrows of the same color indicate the holes using the same kinds of hardwares.
Tighten bolts diagonally
Tighten bolts diagonally
If there are multiple bolts, tighten them in a diagonal sequence.
Also tighten screws with proper force to prevent from damaging threads.
Before firing up your Go³
Before firing up your Go³
Check every items in this checklist to prevent something wrong.
Page updated
Google Sites
Report abuse