Embedded Files
Please note that SecKit tries to be helpful and provides as clear instructions as we can, but we will not be responsible for any of your loss caused during your assembly process.
Model name
Model name
SS-200, aka Cube
SS: Stainless Steel frame
200: build volume 200x200x200 mm³
Manual structure
Manual structure
Each page in this manual is written in a similar structure. Ignore the step if you already know how to do it, but you must read the “Exam” step to make sure you do it correctly.
Direction definition
Direction definition
Hardware types & legends
Hardware types & legends
Hardwares labeled in "bold fonts" are located at this side, facing to you.
Hardwares labeled in "light fonts" are located at the other side.
Hardwares labeled in (parentheses) are optional. Usually they are M3 washers which can be ignored on hard steel surfaces.
Arrows of the same color indicate the holes using the same kinds of hardwares.
Assemble on a flat & solid surface
Assemble on a flat & solid surface
(O) Stiff and heavy table, large tile, granite table, etc.
(X) Carpet, thin and unstable desk, etc.
Tighten bolts diagonally
Tighten bolts diagonally
If there are multiple bolts, tighten them in a diagonal sequence.
Also tighten screws with proper force to prevent from damaging threads.
For the torque used on linear rails and blocks, please refer to HIWIN spec for detailed information.
HIWIN Linear Guideway Technical Information https://www.hiwin.tw/download/ tech_doc/gw/Linear_Guideway-(E).pdf
Adopted from p.84 in HIWIN spec.
Belt length
Belt length
The total length of two XY and three Z belts is about 4.5 meter, and a roll of 5 meter 2GT belt is included.
Keep this in mind and don't cut a too long section while installing belts. An extra 5~10 cm length will be no problem.
Always turn ON with steppers CONNECTED!
Always turn ON with steppers CONNECTED!
The stepping motor driver board needs an electronic load to function normally.
It’s highly possible to damage the drivers if steppers do not exist or are not connected well.
Don’t drink and drive
Don’t drink and drive
If you feel hungry, go eat.
If you feel sleepy, go sleep.
If wife is calling you, go help.
Keep a clear head you’ll get a sturdy and stable machine.
Before firing up your Go
Before firing up your Go
Check every items in this checklist to prevent something wrong.
Still have problems?
Still have problems?
If you still have problems or find any issue, drop us a message:
FB Messenger
https://facebook.com/seckit.3dp
Email
seckit.3dp@gmail.com
Enjoy!
Enjoy!
During the assembly you’ll feel the rigidity and be confident of this machine.
Page updated
Google Sites
Report abuse