Change log

v1.62  Add desc to check power terminals. (05/09/2023) 

v1.61  Fix a typo in XY joiner. (12/12/2022) 

v1.60  Add suggestions of high temp print in the Enclosure chapter. (11/30/2022) 

v1.59  Add a more completed Servo42C initialization steps in the firmware chapter. (11/25/2022) 

v1.58  Add some more descriptions for Servo42C. (11/24/2022) 

v1.57  Add wire grommets and bed expansion mount. (11/14/2022) 

v1.56  Add photos of the ceramic thermal fuse and ceramic terminal block. Ch 9. (11/08/2022) 

v1.55  Replacing the thermal fuse with a ceramic thermal fuse and ceramic terminal block. Ch 9. (11/02/2022)

v1.54  Swap sequence of magnetic rubber and bed heater (11/02/2022)

v1.53  Fix Y endstop hardware typo in chapter 8 (10/27/2022)

v1.52  Fix a bolt type error in chapter 5 (10/19/2022)

v1.51  Adjust Z belt tension instructions (10/13/2022)

v1.50 Label hardware counts and locations and re-arrange layouts of all pages (10/12/2022)

v1.30 Add pictures and descs in multiple parts  (10/08/2022)

v1.16 Update descriptions and pictures of the chapter Bed  (10/06/2022)

v1.15 Adjust assembling sequence in the chapter Z Axis (10/05/2022)

v1.14 Update various printed parts and descriptions according to Zhao Weijie's feedback  (10/02/2022)

v1.13 Update some descriptions according to MoBotArmy live build  (09/29/2022)

v1.12 Update the firmware chapter  (09/25/2022)

v1.11 Add pictures of the orientation of XY pulleys  (09/22/2022)

v1.10 Add several pictures and descs to extruder carriage and wiring (09/17/2022)

v1.00 Add instructions of rear belt tensioners (08/10/2022)

v0.99 Add Octopus Pro wiring(07/21/2022)

v0.98 Add a fix to Servo42C assembly (07/02/2022)

v0.97 Notes for the difference between L & R panels (06/15/2022)

v0.96 Add XY stepper cover instructions (06/08/2022)

v0.95 Draft (05/07/2022)

v0.1 Initial draft (04/26/2022)