AUTHORIZATION FROM MODERATOR IS REQUIRED TO ACCESS THIS PAGE:
PROVIDED ACCESS CODE: *************
ACCESS: GRANTED
Attaches a claw connected to a miniature, mobile arm on the back of the drone.
[+] Claw can carry things under 5 pounds and drag things under 10 pounds.
[-] Adds 2 pounds to the weight limit
Removes some less essential components to make the droid lighter overall.
[+] If using the ROTOR UPGRADE, the drone can hover for around 12 seconds (2 turns) before it falls.
[+] Greatly increases jump height, up to 5 feet.
[+] Allows the drone to catch itself as it falls, preventing damage from smacking into the ground.
[-] Reduces speed by 5 mph.
[-] If sprinting for more than 6 seconds (1 turn), the droid falls over and needs to use an action to stand back up. Can be prevented with the GYROSCOPIC STABILIZER upgrade.
Replaces leg motors with faster but weaker electric motors.
[+] Adds +15 MPH to the max speed.
[-] Reduces carry weight by 20 pounds.
Attaches an ammo box to the back of the Pukeko.
[+] Ammo box carrying a few common calibers.
[-] Adds 4 pounds to the weight limit
Installs a gyroscope into the body of the drone to better keep it stabilized.
[+] Sometimes prevents the drone from falling over after jumping.
[+] Makes the drone much harder to topple over.
[-] Adds 10 pounds to the weight limit
Installs small kickblades into the legs of the drone, allowing it to scale vertical surfaces.
[+] Kickblades are able to pierce rock, allowing the drone to climb walls and other vertical surfaces.
[-] Adds 5 pounds to the weight limit
Blades cannot hold up to the stress of combat, immediately snapping when used to fight.
Installs stronger rotors that allow the drone to hover for around 6 seconds (1 turn) with minor amounts of directional control before it comes plummeting to the ground.
[+] Allows the PUKEKO to hover for around 6 seconds.
[+] Best used to cross large gaps.
[-] Adds 5 pounds to the weight limit
[-] Will plummet out of the air immediately after 6 seconds, with nothing to catch it's fall.