Installing a Hexmodal Temperature Monitors

Step by Step Guide

1. Prepare the Boxes Confirm you have all three boxes: the sensor box (larger rectangular), buffer bottle box (smaller rectangular), and probe box (long rectangular).

2. Connect Probe to Buffer Bottle

• Unscrew the buffer bottle cap

• Insert the probe through the cap and into the bottle

• Screw the nut back on to secure the probe

3. Place Buffer Bottle in Fridge/Freezer

• If there's a probe port, feed the probe cable through it

• Secure the bottle using the provided bracket, zip ties, or adhesive

• Position the bottle in the middle of the fridge on the hinge side

4. Connect the Device

• Unscrew the black cap on the bottom of the device

• Align the probe so the rectangular hole is at 12 o'clock

• Screw the probe into the port

5. Power On the Device

• Press and hold the side button for 3 seconds, then release

• The screen will turn on showing a temperature display

• Confirm network connection by checking for the interlocking squares in the top-right corner of the screen

• Press the side button twice to refresh and show the current temperature

6. Mount the Device

• Attach the device to the wall or side of the fridge

• Leave enough cable slack so it won't get tugged

7. Activate the Device

• Scan the QR code on the device to launch the Hexmodal dashboard

• Log in with your username and password

• Select Building, add a Location description

• Optionally place the device on a floor plan

• Tap Save & Submit

8.  Check Activation

• In the dashboard, scroll to the Compliance Status section

• Confirm the device shows measurements and communication status

• If anything is missing, refer to the troubleshooting guide or install video