2014-04-26 Rebuild Victoria
Overview
Overview
VICTORIA suffered an I/O issue on disk #1 and became unbootable. I had to re-installed the OVS.
References
References
Configuration Details
Configuration Details
The disk configuration is set up as non-RAID. The following details are for future reference:
Procedure
Procedure
I followed the procedure in 00 Install OVMS 3.2.6 with the following exceptions:
- Because of issues with the disk drives, the following partitions were set up:
- /sda3 /boot /sda2 swap /sda1 /
- Partition
/OVS
was not added: eth1
was configured as the interface for managing the OVS because of the issue described in ETH0 has wrong MAC Address after Upgrade to OVMS 3.2.6