Sago was originally made from generation according to tradition, in the process of making sago there consists of steps. Among the steps we chose was the process of sago filtering until it became round. The tool that has been created to filter sago seeds is ‘Gaah’. ‘Gaah’ is a special tool woven using nipah tree leaves. After that, the roll will produce a round-shaped dough through the existing holes. For large-scale business, the sago factory has created a special machine for sifting. This machine was once created specifically for large industries such as sago factories. And this machine is called Automatic Sago Tapioka Ball. This machine can make pearl tapioca, it can also make taro balls, batter balls, starch, tangyuan and other small size balls. Automatic Sagu Tapioka Ball makes machineMade from SS 304, easy to clean. The advantage of this machine has a capacity of 30-50kg / hour & 50-100kg / hour. The power generated by this machine is 50W & 700W and 1280 × 740 × 1080mm size for this machine. With that, we want to create a sago seed filtering machine for small traders and for local residents. Project entitled ‘MACHINE FILTER SAGO’. We will use two types of moto namely dc moto with 24 volts with low speed 0.1 rpm to 2000 rpm to make this machine run with flow. to build the frame of this machine. And also, we will use aluminum to make this machine design. Design by adding wire and some steel to hold the wire used as a filter for this sago. And this filter will be made with 2 shapes. These filters will be built in two different sizes. The first is small in size with 0.04mm and the other is large in size with 0.09mm. For the width of this filter frame is 2m × 4 and the length of this filter frame is 3m × 4.