QFX-10000

Description

The QFX 10000 is Junipers new High Speed Chassis and switches

They are based on a new ASIC called Q5, this CHIP runs 500Gbps of traffic per CHIP.

The larger cards will have more CHIPS and this is all line rate.

They are engineered to run 10/40/100G.

They don't have PoE.

They have nothing to do with the old QFabric.

7.2 Tbps per slot 72 * 100G max per slot {future}

QFX-10000

Front and back

QFX10002-36Q = 36 QSFP+

QFX 10002-72Q = 72 QSFP+

QFX 10008 = 8 usable slots and 6 PSUs

QFX10016 = 16 usable slots and 10 PSUs

Airflow

Front to Back Airflow.

At this stage there are no diagrams

Models and part numbers

QFX10002-72Q

QFX10002-36Q

QFX10008-REDUND

QFX10008-BASE

QFX10016-REDUND

QFX10016-BASE

DC powered.

QFX10008-REDUND-DC

QFX10016-REDUND-DC

QFX10002-72Q-DC

QFX10002-36Q-DC

TAA - Trade Agreement Act

There are no TAA models

When you sell to the USA government in a contract over the sum of $194,000 the products must comply with TAA. This means they are

mostly produced or modified in the USA or a country that has a reciprocal trade agreement with the USA.

{China and most notable electronic makers are absent }

Notice, when selling to the government of the USA you MUST use TAA.

SLOTS

For all intensive purposes the Chassis are

10008 is 8 slots

10016 is 16 slots.

The line cards that can be used today are.

QFX10000-36Q

QFX10000-30C

The first example is the 36Q.

It is built to give you 36 QSFP+ ports.

You can also split a QSFP+ {40G} port into a 4 SFP+ {10G ports} using the usual splitter cables.

Now for the new stuff.

These ports support QSFP28

This is the same size as a QSFP+ port.

But can offer you 100G of throughput using 4 *25 G lanes.

When you plug in a QSFP28 transceiver it will disable the other ports in the GROUP.

So if you look closely at the card if you plug in the 100G QSFP28 it disables the ports next to it.

So the card supports UP to 12 * 100G ports.

This is the 100G to port mapping on the QFX10002 switches

So,

We have Chassis

Line cards

100G ports.

The Big Chassis can have a redundant Supervisor.

Here it will be called a CONTROL BOARD.

It has PTP for timing and 4 SFP+.

QFX10000-RE

By default you get the blank faceplates

QFX10000-RE-BLNK

QFX10000-LC-BLNK

QFX10000-PWR-BLNK

The Chassis support having a redundant switch fabric

QFX10008-SF

QFX10016-SF

Layer 3 routing protocols support

There is a NEW naming convention.

Premium Feature license

Advanced Feature License.

Premium

• BGP (Premium Feature license or Advanced Feature license)

• IS-IS (Premium Feature license or Advanced Feature license)

Overlays

• Integration with Juniper Networks Contrail

• Integration with VMware NSX SDN controller

• VXLAN

• Open vSwitch Database (OVSDB)

• VXLAN L2 Gateway

• VXLAN L3 Gateway*

• Ethernet VPN (EVPN)-VXLAN*

Advanced - all of the above plus

MPLS (Advanced Feature License)

• LDP

• RSVP

• LDP tunneling (LDP over RSVP)

• Fast reroute (FRR)

• IPv6 tunneling (6PE)

• Ingress, transit, and Egress LSPs

• BFD

Power Cords

Unknown

Mounting the switch.

It is unclear.

There is a USB port.

The USB port supports 1G , 2G ,4G

Other

Power supplies

QFX10000-PWR-AC

QFX10000-PWR-DC

QFX10002-PWR-AC

QFX10002-PWR-DC

Fan trays

QFX10008-FAN

QFX10016-FAN

QFX10002-FAN

Cold spare Chassis.

QFX10008-CHAS

QFX10016-CHAS

Support options are based by the Chassis size, aka number of slots.

Next Day Ship, this applies only to (AVAILABLE FOR BRAZIL, RUSSIA, INDIA, AND CHINA ONLY)

and means that they will ship it the next day, not when it arrives.

The support changes by country.

The Juniper options of support are listed below in this slide.