Description
This is an SFP+ 10G switch.
It was one of Juniper's first.
I would offer the EX4550 instead.
This switch supports stacking using the Juniper Virtual Chassis technology and the VC port 128 Gbps.
It has two modular slots.
This switch is 2 RU in height
EX4500
Front
Back
Field replace power
redundant power
Models and part numbers
EX4500-40F-VC1-FB
EX4500-40F-VC1-BF
EX 4500, 40-port 1/10G SFP+ ,128G VC , 1200W AC PS, front to back airflow
EX 4500, 40-port 1/10G SFP+ ,128G VC, 1200W AC PS, back to front airflow
Simple, 40 ports front to back {ports to PSU} or the opposite.
These are the same but TAA,
TAA - Trade Agreement Act
EX4500-40F-VC1-BF-TAA
EX4500-40F-VC1-FB-TAA
EX 4500 TAA, 40-port 1/10G SFP+ ,128G VC , 1200W AC PS, back to front airflow
EX 4500 TAA, 40-port 1/10G SFP+ , 128G VC , 1200W AC PS, front to back airflow
When you sell to the USA government in a contract over the sum of $194,000 the products must comply with TAA. This means they are
mostly produced or modified in the USA or a country that has a reciprocal trade agreement with the USA.
{China and most notable electronic makers are absent }
So basically, the parts are the same parts as a regular EX3300 but it is assembled in the USA, this will add 20% or less to the cost of each item.
Notice, when selling to the government of the USA you MUST use TAA.
DC powered built into the switch.
EX4500-40F-VC1-DC
EX 4500, 40-port 1/10G SFP+ ,128G VC, 1200W DC PS, front to back airflow
Only one model is offered. Front to Back.....
Uplinks
On the switch you have two slots for uplink modules or adding more ports.
The modules can be
EX4500-UM-4XSFP
EX 4500 4-Port 10G SFP+ Uplink Module
By default you get the blank faceplate. If you lose it you can order this.
EX4500-UM-BLNK
Blank for EX4500 UM module (spare)
EX-48-AFL
Layer 3 routing protocols support
Each of these switches can be upgraded to support Layer 3.
To use the following features on Juniper Networks EX3200, EX4200, EX4500, EX6200, and EX8200 Ethernet Switches, you must install an advanced feature license (AFL):
Border Gateway Protocol (BGP) and multiprotocol BGP (MBGP)
Intermediate System-to-Intermediate System (IS-IS)
IPv6 protocols: OSPFv3, RIPng, IS-IS for IPv6, IPv6 BGP
MPLS with RSVP-based label-switched paths (LSPs) and MPLS-based circuit cross-connects (CCCs)
http://www.juniper.net/techpubs/en_US/junos12.1/topics/concept/ex-series-software-licenses-overview.html
To get an AFL license please provide the Serial number of the switch.
show chassis hardware
then reach out to your representative, if you don't have one let me know.
They will be able to generate the required license.
Power Cords
Advanced Feature License forEX4500-40F SKUs
This switch draws a lot of power as it powers SFP+
The power cord is C19....
the other side will depend on the country.
If you need a different length or if you come from a country not on this list.
You can use a third party cable. We can provide this.
*By default the switch comes with 1 cable for the country it is being sold to.
Mounting the switch.
2 Post or 4 post using 2 of the posts.
EX-RMK
EX Series Rack Mount Kit
This kit is included when you buy a switch, if you lost it you can order the above.
4 post attached to all 4 posts.
EX4500-4PST-RMK
4-post Rack Mount Kit for EX4500 and QFX5100-96S
Ports.
The EX4500
Has the following ports.
2 SLOTS modular
40 ports SFP+
1 management port RJ-45
1 Console port rollover
Dual power
Field replace fan tray
Field replace VC module
Optics
Supported SFPs are
I've arranged this by the chances of someone ordering them
1 Gbps optics.
RE-USB-1G-S
T is copper
SX is multimode
For singlemode ask for the distance to verify which one.
There is a USB port.
The USB port supports 1G , 2G ,4G
Virtual Chassis
Like we said, this switch has Virtual Chassis ports built into it.
To order the Virtual Chassis cables.
USB media upgrade/spare for RE
Other
EX4500-PWR1-AC-BF
EX4500-PWR1-AC-FB
EX4500-PWR1-DC
EX4500 1200W AC power supply – back to front airflow
EX4500 1200W AC power supply - front to back airflow ,
EX4500 1200W DC power supply - front to back airflow ,
The above are power supplies.
You can add a second power to each switch, so match the power to the switch.
Power blank if you lose your blank
EX4500-PWR-BLNK
EX4500-FANTRAY-BF
EX4500-FANTRAY-FB
EX4500-VC1-128G
Blank for EX4500 PS module (spare)
EX4500 fantray – back to front airflow (spare)
EX4500 fantray - front to back airflow (spare)
Field replaceable fan trays in case a fan has failed.
EX4500, 128G Virtual Chassis module
Virtual Chassis module.
Originally this was an extra however the part numbers today all include the VC in the bundle
So this is a field replace cold spare part number.
Support options are.
Next Day Ship, this applies only to (AVAILABLE FOR BRAZIL, RUSSIA, INDIA, AND CHINA ONLY)
and means that they will ship it the next day, not when it arrives.
The support changes by country.
If your client is looking to save a little more.
Juniper has 3 year pre-paid bundles.
The Juniper options of support are listed below in this slide.