EX-8200

Description

The EX 8200 is Juniper's more senior Chassis

This Chassis supports PoE

Please update Saar if you plan on selling one.

EX8200

Front and back

EX8208

EX 8216

E

Field replaceable power, up to 6

Field replaceable fan

Can be stacked using an external MODULE

Airflow for both is side to side.

Models and part numbers

The BASE has 1 routing engine.

The REDUNDANT has 2 routing engines and more power supplies

DC powered.

The same can be done with a DC power supply.

TAA - Trade Agreement Act

When you sell to the USA government in a contract over the sum of $194,000 the products must comply with TAA. This means they are

mostly produced or modified in the USA or a country that has a reciprocal trade agreement with the USA.

{China and most notable electronic makers are absent }

Notice, when selling to the government of the USA you MUST use TAA.

SLOTS

For all intensive purposes the Chassis are

8208 six slots

8216 fourteen slots

This is not fully accurate as you can remove a routing engine and put a card in that slot

however that would negate the real value of the Chassis which is high availability using redundant routing engines.

So I would recommend sticking to the above numbers.

The line cards that can be used today are.

This switch is TAA capable.

So there are TAA cards

The 8208 has a combo fabric routing engine

The 8216 has an independent routing engine and the fabrics are in the back {up to 8}

Layer 3 routing protocols support

Each of these switches can be upgraded to support Layer 3 routing protocols

The upgrade price depends on the Chassis size

Features Requiring a License on EX3200, EX4200, EX4500, EX4550, EX6200, EX8200, and EX9200 Switches

To use the following features on EX3200, EX4200, EX4500, EX4550, EX8200, and EX9200 switches, you must install an advanced feature license (AFL):

• • Border Gateway Protocol (BGP) and multiprotocol BGP (MBGP)

  • Intermediate System-to-Intermediate System (IS-IS)

  • IPv6 routing protocols: IS-IS for IPv6, IPv6 BGP, IPv6 for MBGP

  • Logical systems (available only on EX9200 switches)

  • MPLS with RSVP-based label-switched paths (LSPs) and MPLS-based circuit cross-connects (CCCs) (Not supported on EX9200 switches)

http://www.juniper.net/techpubs/en_US/junos13.2/topics/concept/ex-series-software-licenses-overview.html

To get an AFL license please provide the Serial number of the switch.

show chassis hardware

then reach out to your representative, if you don't have one let me know.

They will be able to generate the required license.

Power Cords

the other side will depend on the country.

If you need a different length or if you come from a country not on this list.

You can use a third party cable. We can provide this.

*By default the switch comes with 1 cable per power supply for the country it is being sold to in a bundle.

Mounting the switch.

2 post

4 post - requires a kit

The power tray is included with the EX 8200s.

Ports.

The EX8208

nothing in the back of interest.

EX 8216 front

Optics

Supported SFPs are

1 Gbps optics.

T is copper

SX is multimode

For singlemode ask for the distance to verify which one.

100 speed optics also called FE

These are mainly for backward compatibility to very old devices.

CWDM optics

CWDM allows you to use eight active wavelengths. So basically 8 people can send on the same fiber cable.

Each of the above works in one wavelength and the other side must have the same optic wavelength.

Single Strand

Single strand allows a client to get 1 Gbps of traffic on a single fiber cable.

So for example if the client has 1 Fiber cable

He can double the throughput he can run on it by using single strand technology.

So instead of 1Gbps of traffic, he can run 2Gbps. Blue will be receive and red will be send.

Anyway, I doubt many people are smart enough to use this and both sides must support the SFP technology.

There is a USB port.

The USB port supports 1G , 2G ,4G

Other

Power supplies

*8216 has two fan trays.

Cold spare Chassis.

the old part numbers for the Chassis are.

Support options are based by the Chassis size, aka number of slots.

Next Day Ship, this applies only to (AVAILABLE FOR BRAZIL, RUSSIA, INDIA, AND CHINA ONLY)

and means that they will ship it the next day, not when it arrives.

The support changes by country.

These are the parts for the old Chassis.

The Juniper options of support are listed below in this slide.