EX2200 - normal version

As you can see this switch doesn't have field replaceable components.

If a fan goes or a power supply goes. You need to replace the whole thing.

Models and part numbers

When you sell to the USA government in a contract over the sum of $194,000 the products must comply with TAA. This means they are

mostly produced or modified in the USA or a country that has a reciprocal trade agreement with the USA.

{China and most notable electronic makers are absent }

So basically, the parts are the same parts as a regular EX2200 but it is assembled in the USA, this will add 20% or less to the cost of each item.

Notice, when selling to the government of the USA you MUST use TAA.

Layer 3 routing protocols support

Each of these switches can be upgraded to support Layer 3.

These power cords are pretty simple.

They are C13 on one side.

the other side will depend on the country.

If you need a different length or if you come from a country not on this list.

You can use a third party cable. We can provide this.

*By default the switch comes with 1 cable for the country it is being sold to.

Mounting the switch.

The switch includes the following kit by default.

This kit is for a 2 post rack

If you want to mount it on a 4 post rack using all 4 corners.

Your last option is to mount this switch on a wall.

Ports.

The EX2200-C

Has the following ports.

24 or 48 ports PoE or regular.

4 SFP ports

1 management port RJ-45

1 Console port rollover cable

Optics

Supported SFPs are

I've arranged this by the chances of someone ordering them

1 Gbps optics.

T is copper

SX is multimode

For singlemode ask for the distance to verify which one.

100 speed optics also called FE

These are mainly for backward compatibility to very old devices.

CWDM optics

CWDM allows you to use eight active wavelengths. So basically 8 people can send on the same fiber cable.

Each of the above works in one wavelength and the other side must have the same optic wavelength.

Single Strand

Single strand allows a client to get 1 Gbps of traffic on a single fiber cable.

So for example if the client has 1 Fiber cable

He can double the throughput he can run on it by using single strand technology.

So instead of 1Gbps of traffic, he can run 2Gbps. Blue will be receive and red will be send.

Anyway, I doubt many people are smart enough to use this and both sides must support the SFP technology.

USB port

There is a USB port just below the management port.

The USB port supports 1G , 2G ,4G

Support options are.

Next Day Ship, this applies only to (AVAILABLE FOR BRAZIL, RUSSIA, INDIA, AND CHINA ONLY)

and means that they will ship it the next day, not when it arrives.

The support changes by country.

If and only if your client has 10 units or more.

You can get a site license.

For example if you are a college or school, where you mount these.

You can save a lot of money and get a site license.

All the units at the site must have this applied to them.

The Juniper options of support are listed below in this slide.

RPS - Redundant power system.

As you noticed the EX2200 has one power supply.

To avoid it stopping to work with power loss etc.

The Juniper team offer you the option of sourcing an external RPS.

The setup will look like the image above with the RPS being backup power supply.

One RPS can power up to 6 switches : ex3300 and ex2200 switches.

The RPS can have up to three EX-PWR3-930-AC

The RPS port on the EX 2200 is covered with a metal cover, simply remove the screws.

The RPS ports on the RPS are also covered so simply remove the one you need.

Then connect an RPS cable.

The part numbers are

Chassis

or

Power supplies - maximum of three

For each power supply you must order a power cord. Pay attention.

Cables

Cable to connect the EX to the RPS. {The cable is 1.5 meters}

A RPS doesn't need a JCARE contract.

Information for clients

EX 2200-C optic compatibility.

http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/specifications/optical-interface-ex2200-support.html

Ex 2200-C datasheet

http://www.juniper.net/us/en/local/pdf/datasheets/1000388-en.pdf

Juniper Care entitlements.

http://www.juniper.net/us/en/local/pdf/datasheets/1000326-en.pdf