EX-9200

Description

The EX 9200 is Junipers Core Chassis.

It is based on the successful MX platform

It doesn't have PoE.

EX9200

Front and back

EX9204

EX 9208

EX9214

Field replaceable power, up to 4

Field replaceable fan

Can be stacked

Airflow

9204

9208

9214

basically in English.

9204 and 9208 are side to side

The 9214 is front to back

Models and part numbers

Currently Juniper is releasing a new Fabric called EX9200-SF2

This fabric offers more throughput per slot.

So the part numbers with a 3 will include that fabric.

You can mix and match but you should have all EX9200-SF2 in order to gain the performance.

The BASE has 1 routing engine.

The REDUNDANT has 2 routing engines and 2 Switch fabrics {in the case of the EX9214 it has 3}

These are the old part numbers, they will be phased out and should only be used with approval.

these numbers are VERY similar and VERY confusing so pay attention.

DC powered.

The same can be done with a DC power supply.

These are the new DC Chassis.

These are the old

TAA - Trade Agreement Act

There are no TAA models

When you sell to the USA government in a contract over the sum of $194,000 the products must comply with TAA. This means they are

mostly produced or modified in the USA or a country that has a reciprocal trade agreement with the USA.

{China and most notable electronic makers are absent }

Notice, when selling to the government of the USA you MUST use TAA.

SLOTS

For all intensive purposes the Chassis are

9204 two slots

9208 six slots

9214 eleven slots.

This is not fully accurate as you can remove a routing engine and put a card in that slot

however that would negate the real value of the Chassis which is high availability using redundant routing engines.

So I would recommend sticking to the above numbers.

The line cards that can be used today are.

SF2 should be able to reach up to 480 Gbps in the future with the enhanced NG line cards.

So sell the SF2.

Layer 3 routing protocols support

Each of these switches can be upgraded to support Layer 3 routing protocols

The upgrade price depends on the Chassis size

Features Requiring a License on EX3200, EX4200, EX4500, EX4550, EX6200, EX8200, and EX9200 Switches

To use the following features on EX3200, EX4200, EX4500, EX4550, EX8200, and EX9200 switches, you must install an advanced feature license (AFL):

• • Border Gateway Protocol (BGP) and multiprotocol BGP (MBGP)

  • Intermediate System-to-Intermediate System (IS-IS)

  • IPv6 routing protocols: IS-IS for IPv6, IPv6 BGP, IPv6 for MBGP

  • Logical systems (available only on EX9200 switches)

  • MPLS with RSVP-based label-switched paths (LSPs) and MPLS-based circuit cross-connects (CCCs) (Not supported on EX9200 switches)

http://www.juniper.net/techpubs/en_US/junos13.2/topics/concept/ex-series-software-licenses-overview.html

To get an AFL license please provide the Serial number of the switch.

show chassis hardware

then reach out to your representative, if you don't have one let me know.

They will be able to generate the required license.

Power Cords

This switch draws a lot of power as it powers a Chassis

The power cord is C19....

the other side will depend on the country.

If you need a different length or if you come from a country not on this list.

You can use a third party cable. We can provide this.

*By default the switch comes with 1 cable per power supply for the country it is being sold to in a bundle.

Mounting the switch.

It is unclear.

Currently there is no RACK mount kit for 4 posts.

Juniper offers the

Extended cable management for the EX9214 only

ECM-MX960

My guess is you can use the Cable management parts for the MX480 and MX240 for the EX9208 and 9204 but

we would need to ask Juniper.

Ports.

The EX9214

EX 9214 back

the Switch Fabric has a hole in the middle and into that hole you place the routing engine.

Optics

Supported SFPs are

1 Gbps optics.

T is copper

SX is multimode

For singlemode ask for the distance to verify which one.

100 speed optics also called FE

These are mainly for backward compatibility to very old devices.

CWDM optics

CWDM allows you to use eight active wavelengths. So basically 8 people can send on the same fiber cable.

Each of the above works in one wavelength and the other side must have the same optic wavelength.

Single Strand

Single strand allows a client to get 1 Gbps of traffic on a single fiber cable.

So for example if the client has 1 Fiber cable

He can double the throughput he can run on it by using single strand technology.

So instead of 1Gbps of traffic, he can run 2Gbps. Blue will be receive and red will be send.

Anyway, I doubt many people are smart enough to use this and both sides must support the SFP technology.

QSFP+ cables

*** technically not supported yet, however they work

Other

Power supplies

The above are for the EX9204 and 9208

EX9214 power

There are no blanks.

AirFilters

Fan trays

*** important, the EX9214 has two fan trays.

Cold spare Chassis.

the old part numbers for the Chassis are.

Support options are based by the Chassis size, aka number of slots.

Next Day Ship, this applies only to (AVAILABLE FOR BRAZIL, RUSSIA, INDIA, AND CHINA ONLY)

and means that they will ship it the next day, not when it arrives.

The support changes by country.

These are the parts for the old Chassis.

The Juniper options of support are listed below in this slide.