Description
The EX comes in two different shapes.
The first is the compact which competes against the Cisco compact switches like 3560C
The second is the full length one which is 1RU and is a normal switch.
I will be reviewing the first one. Which is the compact one.
EX2200 compact.
Front
Back
As you can see this switch doesn't have a Fan.
Models and part numbers
EX2200-C-12P-2G
EX2200-C-12T-2G
EX2200-C compact, fanless switch with 12-port 10/100/1000BaseT (12-ports PoE+) and 2 Dual-Purpose (10/100/1000BaseT or SFP) uplink ports
EX2200-C compact, fanless switch with 12-port 10/100/1000BaseT and 2 Dual-Purpose (10/100/1000BaseT or SFP) uplink ports
EX-12-EFL
The first model is PoE+ the second is regular.
Layer 3 routing protocols support
Each of these switches can be upgraded to support Layer 3.
These are the items that require a license.
For Juniper Networks EX2200 Ethernet Switches, the following features can be added to basic Junos OS by installing an enhanced feature license (EFL):
Bidirectional forwarding detection (BFD)
Connectivity fault management (IEEE 802.1ag)
IGMP (Internet Group Management Protocol) version 1 (IGMPv1), IGMPv2, and IGMPv3
OSPFv1/v2 (with four active interfaces)
Protocol Independent Multicast (PIM) dense mode, PIM source-specific mode, PIM sparse mode
Q-in-Q tunneling (IEEE 802.1ad)
Real-time performance monitoring (RPM)
http://www.juniper.net/techpubs/en_US/junos12.1/topics/concept/ex-series-software-licenses-overview.html
To get an EFL license please provide the Serial number of the switch.
show chassis hardware
then reach out to your representative, if you don't have one let me know.
They will be able to generate the required license.
Power Cords
Enhanced Feature License for EX2200-C
These power cords are pretty simple.
They are C13 on one side.
the other side will depend on the country.
If you need a different length or if you come from a country not on this list.
You can use a third party cable. We can provide this.
*By default the switch comes with 1 cable for the country it is being sold to.
Mounting the switch.
By default this is a desktop switch.
So you get 4 rubber feet which you can glue to the switch.
If you want to mount it under a desk or on a wall.
The switch has room for screws. These are NOT provided.
Simply drill them in the right location then slide the switch on them.
or under the desk like this.
If the surface you want to mount the switch on is ferrous {ie metallic}
You can use the Magnet plate.
EX-MGNT-MNT
Magnet Mount for EX2200-C and WLC100
To the above
Desk mount.
Wall mount
and magnet mount you can attach cable guards.
EX-CBL-GRD
Cable Guard for EX2200-C
You can also attach a LOCK that prevents people from walking off with your switch.
A security cable lock is NOT sold by Juniper. You can look for a third party.
It simply looks like this.
Simply google Kensington lock
If you want to rack mount this on a TWO post rack.
This is the Rack mount for this switch
EX-RMK2
Rack Mount Kit for EX2200-C
Ports.
The EX2200-C
Has the following ports.
12 ports PoE or regular.
2* Dual purpose ports either SFP or RJ-45
1 management port RJ-45
1 Console port rollover
1 console port USB
So supported SFPs are
EX-SFP-1FE-FX-ET
EX-SFP-1GE-SX-ET
Extended Temperature SFP 100BASE-FX; LC connector; 1310 nm; 2 km reach on multimode fiber for EX2200-C
Extended Temperature SFP 1000BASE-SX; LC connector; 850 nm; 550 m reach on multimode fiber for EX2200-C
EX-SFP-1GE-SX
EX-SFP-1FE-FX
SFP 1000Base-SX Gigabit Ethernet Optics, 850nm for upto 550m transmission on MMF
EX-SFP-1GE-LH
EX-SFP-1GE-LX
SFP 100Base-FX Fast Ethernet Optics, 1310nm for 2km transmission on MMF
SFP 1000Base-LH Gigabit Ethernet Optics, 1550nm for 70km transmission on SMF
SFP 1000Base-LX Gigabit Ethernet Optics, 1310nm for 10km transmission on SMF
There is a USB port.
The USB port supports 1G , 2G ,4G
RE-USB-1G-S
RE-USB-2G-S
RE-USB-4G-S
USB media upgrade/spare for RE
2GB USB media upgrade/spare for RE
4GB USB media upgrade/spare for RE
The console port is a rollover RJ-45 it is active.
The Management port is a regular RJ-45 and can't route
The Mini USB is another console port and requires the
EX-CBL-CON-USB
Console Cable with USB Type A and mini-B connectors for EX2200-C
That is it for the smallest switch.
Support options are.
Next Day Ship, this applies only to (AVAILABLE FOR BRAZIL, RUSSIA, INDIA, AND CHINA ONLY)
and means that they will ship it the next day, not when it arrives.
The support changes by country.
If your client is looking to save a little more.
Juniper has 3 year pre-paid bundles.
If and only if your client has 10 units or more.
He can get a site license.
For example if you are a school, where you mount these under the desks.
You can save a lot of money and get a site license.
All the units at the site must have this applied to them.
3 year pre-paid
5 year pre-paid
SV3-COR-EX2200-C-SITE
SV5-COR-EX2200-C-SITE
Juniper Care Core Support for 3 Year Prepaid Basic NETWORK LICENSE for EX2200-C
Juniper Care Core Support for 5 Year Prepaid Basic NETWORK LICENSE for EX2200-C
The Juniper options of support are listed below in this slide.
Information for clients
EX 2200-C optic compatibility.
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/specifications/optical-interface-ex2200-support.html
Ex 2200-C datasheet
http://www.juniper.net/us/en/local/pdf/datasheets/1000388-en.pdf
Juniper Care entitlements.
http://www.juniper.net/us/en/local/pdf/datasheets/1000326-en.pdf