Olympia Lighting

1. House Bar Fixtures

Quantity: 16 fixtures Location: House bar Numbering: 1–16 DMX Footprint: 4 addresses per fixture DMX Range: 1–64

Fixture Type: ETC ColorSource Fresnel V RGB

2. Rear‑of‑Stage Fixtures

Quantity: 7 fixtures Location: Rear of stage Numbering: 21–27 DMX Footprint: 3 addresses per fixture DMX Range: 101–121

Notes: Fixtures should be aimed evenly across the stage apron to avoid shining directly into the audience while remaining visible for effect lighting.

Fixture Type: ETC ColorSource PAR RGB

4. ETC EchoTouch Panel

Location: Wall‑mounted above the DMX receptacle, stage left. Manual: A copy is in the folder below.

Description: The EchoTouch panel provides a touchscreen control interface with an icon layout similar to the ColorSource console. 

In addition to controlling the color and brightness of each fixture, it also controls fixture power. The icons labeled House Right Power, House Left Power, and Stage Light Power turn on the power to the DMX light fixtures. These must be ON before the lighting console can control the fixtures. When finished using the fixtures, be sure to press the blue OFF icon on the lower right side.

Important: Tap power buttons one at a time and wait 10 seconds or so to allow it time to react.

DMX Connectivity:

The panel is wired to receive DMX input from the lighting console and pass DMX output downstream to lighting fixtures..

Note: This unit has a battery that needs to be replaced from time to time.

Note: This unit is powered by 24 VDC from an ETC EchoConnect, a 2-unit set that is powered by 120 VAC

Basic operation appears functional, but full understand of it has not been completed.

5. ETC Echo Inspire Station

Model: 6‑button Echo Inspire Station Location: Mounted to the left of the EchoTouch panel Manual: A copy is in the folder below.

This is a remote of the EchoTouch Panel's 5 presets plus off.