5th Floor Chapel

5F Chapel Instructional Video

5F Chapel Instructions

Turning on the System

1. Power ON the MAIN POWER switch on the MCU power switch.

2. Switch ON the Projectors and select which SOURCE you need
   - Apple TV: Macbooks and iPads
   - Miracast: Windows
   - Stage PC: ProPresenter

3. Login to Audio Mixer
   - User: Admin
   - Password: Admin

You now are able to control the volume of the various inputs
- Microphones
- Laptops

Turning off the System

1. Turn OFF the Projectors

2. Power OFF the MAIN POWER on the MCU power switch

PC Login

You can login into the Desktop PC using your ICS Portal username and password and it will create an account for you. 

If you're wanting to share an account across multiple users, you can use the av production team's login.

Username: avprodteam

Password: pr0dteamonly

Troubleshooting

Something not receiving power

The trickiest problem that you will run into is something is not receiving power, most likely the speakers. To fix that,

1. On the MCU, press and hold the 'U' button. This will open up the menu

2. Use the arrow keys to navigate to 2. Manual. Then go into that sub menu by clicking in with 'U'

3. Use the arrow keys to navigate to 1. All On. Then select that option with 'U'. This will finish the startup sequence, if it was interrupted.

Audio not coming out of the speakers

Make sure you are logged into the Audio Mixer

- User: Admin
- Password: Admin

• Adjust the faders, both on MASTER VOLUME on the far right and the specific channels (labeled)

• Unmute the channels (RED LIGHT ON means it is muted. RED LIGHT OFF means that it is unmuted)

• Check the batteries on the speakers. If low, there is generally a stash of batteries stored underneath the sound system. If there are no batteries, go down to the JLL guard room and request some for the 5th floor chapel.