SNMP
Characters that are not allowed
Ü
<Space>
#
'
"
\
Characters that are allowed
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!$%&()+,-.;=@[]^_`{}~/|:<>?*
NOTE
If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network.
To restart the machine, proceed to the Management Settings > Restart/Reset page.
SNMPv1/v2c
SNMPv1/v2c
Make settings here. Protocol
Default value is On
Read Community
Default value is public
Length is 1 to 15 characters
Write Community
Default value is public
Length is 1 to 15 characters
Note
SNMP write access is not available if the field is blank.
sysContact
Default value is blank
Note
The MIB-II sysContact object. Usually this is the E-mail address of the network administrator
sysName
Default value is blank
Note
The MIB-II sysName object. Usually this is the host or domain name of the machine
sysLocation
Default value is blank
Note
The MIB-II sysLocation object. Usually this is the location information of the machine which is under Location of System Settings page
Go to the Device Settings > System to modify the Location field
HP Web Jetadmin Compatibility
On
Off
Default value is Off
Note
Tums HP Web Jetadmin Compatibility On or Off. After you have changed the setting, you must restart the machine.
Authentication Traps
On
Off
Default value is Off
Note
If enabled (On), an SNMP trap is generated when an attempt to read or write is made using an incorrect community name.
The trap is sent to the configured trap address.
After you have changed the setting, you must restart the machine.
Trap Recipient
SNMPv3
SNMPv3
Make settings here. Protocol
Default value is Off
Authentication
On
Off
Default value is On
Hash
MD5
SHA1
Default value is MD5
Recommended value is SHA1
Privacy
On
Off
Default value is On
Encryption
DES
AES
Default value is DES
Recommended value is AES
Read Only User
User Name
Is case-sensitive
Length is 1 to 32 characters
Password
Is case-sensitive
Length is 8 to 32 characters
Read/Write User
User Name
Is case-sensitive
Length is 1 to 32 characters
Password
Is case-sensitive
Length is 8 to 32 characters