For receiving a document to print
IPv4/IPv6
TCP
Can be set to on or off
Open
IPv4/IPv6
TCP
Can be set to on or off
Close
Used by the printer's Command Center RX web page
IPv4/IPv6
TCP
Can be set to on or off
Open
Even if HTTP is set to Off, port 80 is opened for port forwarding if HTTPS is enabled
IPv4 only
UDP
Can be set to on or off
open
NetBEUI is a protocol for a small network that is used for file sharing and print services, as well as for receiving a document.
IPv4 only
TCP
Can be set to on or off
open
SNMP protocol is used in network management system. Normal communication will be performed using read and write community names.
SNMPv3 provides ability to protect data confidentiality through authentication and encryption
IPv4/IPv6
TCP
Can be set to on or off
open
Used by the printer's Command Center web page
DO NOT DISABLE
IPP over SSL/TLS is a protocol that combines SSL/TLS which encrypts a channel, and IPP which is used for internet printing. In addition, the IPP over SSL/TLS can have a valid certificate
IPv4/IPv6
TCP
Can be set to on or off
Close
IPv4/IPv6
TCP
Can be set to on or off
open
opened on model supporting SMB print over IPv6
LPD is a printing protocol that is used for printing text files or Postscript
IPv4/IPv6
TCP
Can be set to on or off
Open
Used for internet printing
IPv4/IPv6
TCP
Can be set to on or off
Close
Direction: Device to the software
Kyocera Net Viewer
Kyocera Fleet Services DRD Tool
IPv4/IPv6
UDP
Can be set to on or off
open
ThinPrint is a print technology available in Thin client environments, and also supports SSL/TLS
Available on some models
Activation is required to use ThinPrint
IPv4/IPv6
TCP
Can be set to on or off
Closed
IPv4/IPv6
UDP
Can be set to on or off
close
only IPv4 is opened on VxWorks
Windows Vista WSD is a protocol that enables MFPs/Printers for a network connection. This also enables users to detect (install) MFPs/Printers device or send/receive data easier. Original documentation image scanned through MFP/Printer can be stored in WSD PC as a file.
IPv4/IPv6
TCP
Can be set to on or off
Open
NOT SUPPORTED YET - RESERVED FOR FUTURE USE
Windows Vista WSD is a protocol that enables MFPs/Printers for a network connection. This also enables users to detect (install) MFPs/Printers device or send/receive data easier.
TCP
IPv4/IPv6
Can be set to on or off
Closed
Used by the Fiery board
IPv6 only
TCP
Opened when fiery board is attached
Closed
Remote Panel on TASKalfa's
IPv4/IPv6
TCP
Can be set to on or off
close
IPv6 only
TCP
Can be set to on or off
open
IPv4/IPv6
TCP
Can be set to on or off
latest A3 models
open
IPv4/IPv6
TCP
Can be set to on or off
from latest A3 models
open
Enhanced WSD takes a procedure for easily connecting the various devices connected to a network, and using. The status monitor through this port 9090 can monitor the status of MFP/Printer.
IPv4/IPv6
TCP
Can be set to on or off
open
Enhanced WSD (SSL/TLS) is a security protocol as well as an enhanced WSD with using SSL/TLS. This provides encryption, authentication and safety (Protect against alteration).
IPv4/IPv6
TCP
Can be set to on or off
open
Apple macOS scanning over network from Image Capture
IPv4/IPv6
TCP
Can be set to on or off
open
Apple macOS scanning over network from Image Capture
IPv4/IPv6
TCP
Can be set to on or off
open
IPv4/IPv6
TCP
Can be set to on or off
close
Used by the KYOCERA printer driver
RAW protocol takes different steps, compared to LPR for printing. In general, MFP/Printer uses port number 9100, and also uses SNMP or MIB to configure and monitor printer status
PortPrint lp1, lp2, lp3, lp4
IPv4/IPv6
TCP
Can be set to on or off
open
FAX driver
IPv4/IPv6
TCP
Can be set to on or off
open
RAW
KM-WSDL
KM-WSDL (SSL/TLS)
SNMP
Kyocera own protocol