WHERE TO PLACE YOUR STATION ID & LINER AUDIO FILES

Jock##ID folder – The ID folder is meant for your station ID's. This should contain all the station ID's that you want to play. It

should be the same length, and is typically 10 seconds long. Whenever the satellite receiver sends a station ID closure (Sat Logic Pin 2), it will play randomly from what is contained in this folder.

Jock##Liner1 / Jock##Liner2 / Jock##Liner3 / Jock##Liner4

– The Liner folders are meant for different length Liner files. For example, you may place all of your 3 second liners in the Jock1Liner1 folder, 5 second liners in the Jock1Liner2 folder, & 10 second liners in the Jock1Liner3 folder. The length in each folder is determined by the satellite clock you are using and how you have the Bridge wired from the receiver. For example, whenever a closure is received on Sat Logic Pin 4, it will play at random from the Jock1Liner2 folder which is your 5 second liners. 

To determine what length of liners need to go in which folders, you will need to consult with your engineer with which closures went to which pin.

The wiring on the Bridge is as follows:

Full Logic Pin Configuration:

Pin 1 - Commercial Break

Pin 2 - Station ID

Pin 3 - Liner #1 folder

Pin 4 - Liner #2 folder

Pin 5 - Liner #3 folder

Pin 6 - Liner #4 folder

Pin 7 - na

Pin 8 - na

Pin 9 - Logic Ground