Weasley Wizard Wheezes Piggy Bank

I started with the base, then cut out the walls and let them get close to leather hard before trying to add the windows. Creating the windows was difficult as I had to roll similar-sized coils that had to be cut a little over in half down the middle to get the right sizing. They were then added to the walls, then the details were carved in once they'd dried some. Carving in the words on the sides of every window was hard as they had to be really small. I then had to remake one as it warped really weirdly and got smashed by something. Making the front wall with the arms, head, and hat of the Weasley Twins was a challenge. But it turned out really good. I had to use mostly underglaze for this piggy bank,  purple and orange for their iconic colors. Purple for the walls and orange for the windows/arms. I used the same window color and door from the Leaky Cauldron and Gringotts. Once it was fully glazed in color I had to do a full three coats of clear glaze to have the shiny feature the rest had so they all matched in a way. One of the side pieces (window) fell off, it was glued back on after the glaze firing. During the first glaze firing the kiln did not get up to temperature so the glazes are slightly cloudy. The entire piggy bank was re-fired.