AWD Skidplate

From: https://chevygmcvans.com/bb2/viewtopic.php?f=14&t=85

Here is the dimensional drawing of the skid plate used on the AWD's. I do not know if the front steering stuff is in the way or not on the RWD's. Also there is a different cross member for the engine that the AWD's don't have.

The other piece needed is a 2" angle iron 1/4" thick and drilled with the 3 holes for mounting the front of the skid plate onto. It is 12" long and is drilled/tapped for 3/8"-16 hardware. This mount piece will also be drilled to mount onto the stock cross member where the original was welded. More pics will be posted during NECO 2008.

The 4 holes for the trans cross member will be countersunk and also the holes in the cross member will be drilled/tapped to 3/8"-16.