DoorAutolock

Programming automatic door locks. (2000/2001 start?)

With the key in the ignition but in the off position, pull and hold the turn signal lever towards you. Turn the key on/off/on/off and release the turn signal lever. The door locks will then lock and unlock to show that you are in programming mode. Within 30 seconds you press one of the following:

no doors lock/unlock(autolock-disabled): press the power lock switch twice on lock.

all doors lock/driver's door unlocks: press the power lock switch twice on lock and once on unlock

all doors lock/unlock: press the power lock switch once on lock and twice on unlock

all doors lock/none unlock: press the power lock switch once on lock and three times on unlock

Programming mode is exited after 30 seconds with no lock button presses, or when you turn the ignition on.