Koolinator 1st Ed.

List of modifications:

• The watercooling module from the previous casemod (Koolance) was replaced in the top of this case.
• Behind it, in the top, I placed a toy/globe that generates and visualises an electric field between the center and your hand, if you touch it.
• The sidepanels were perforated by default. I added red/pink CCFLs to light up the holes.
• Behind the case logo in the front I placed a blue LED.
• On the front bottom of the case I mounted a running LED strip, based on the nightrider front lights. This was based on a Velleman kit.
• In the left panel I made a window.
• The plexiglas in the window was modified to show the gate of Moria, from the movie "The Lord of the Rings".
• In the front panel I built 2 VU meters using roughly 60 LEDs each. Based on an analogue (audio) signal these would run up and down.
• Behind the front panel was a 7-segment display showing the temperature measured by the separate sensor. To the left and right of this display I mounted additional red LEDs.
• Behind the front panel was also a 2x16 character display. I'm not sure I got it working as intended. Later I replaced it by a graphical display of 256x256 dots. I'm sure I never finished that project fully. It would only show some system info.
• Also behind the front panel were many buttons to enable/disable all the implemented lighting. There were also some buttons to adjust the speed of fans.
• I built many fans in this case.
• An additional (second) watercooling system for just the VGA card (GPU).
• I implemented a second power supply unit to power all the lighting and cooling.