1.54 inch 128x64 DIY More - 7-wire
Convert to I2C
Convert to I2C
R9: Remove 472 resistor
R8: Add 472 resistor from R9
R3: Add 000 resistor
R4: Add 000 resistor
Notes:
472 resistor = 4.7k ohm resistor
000 resistor = 0 ohms resistor. Can be replaced with wire or solder blob.
Connect to Gotek
Connect to Gotek
CS: Not Connected
DC: Not Connected
RES: Connect to the Gotek RST Pin
SDA: Connect to Gotek DISP_CLK J7 Pin
SCL: Connect to Gotek DISP_DIO J7 Pin
VCC: Connect to Gotek 3.3V J7 Pin
GND: Connect to Gotek VSS J7 Pin
Gotek J7 Pins:
Gotek Power pins:
Data Sheet
https://drive.google.com/file/d/1iVhJifixg9H4hn2XMqQRseNkZsj88qcW/view?usp=sharing