Step 1: Before you can create a planning drawing you must ensure that you have created a model and saved the model.

Step 2: Go to the top-left corner of the screen and select the drop-down menu.

Select Drawing > From Design

This will open a new 'Create Drawing' window.

Step 3: Go to the 'Create Drawing' window.

Select the 'Sheet Size' drop-down window > Select A4 (297mm x 210mm) > Select 'OK'.

This will open a new drawing environment.

Step 4: Move the cursor somewhere on the page and press the Enter key to place the base view.

Please note that the precise location on the page is not vital as we can move this later.

Step 5: Select the base view that you created in Step 4 > Press P on your keyboard to create a projected view.

End View: as you move your cursor to the right you will notice that you can create a side elevation (side view). Left-click to confirm this projection.

Plan View: as you move your downwards you create a plan elevation (birds eye view). Left-click to confirm this projection.

Isometric View: as you move your downwards you create an isometric elevation. Left-click to confirm this projection.

Press ENTER to confirm all views.

Step 6: To reposition views: Select the view > left-click on the grey handle > drag the view to the desired location on the page.

Try to reposition the views in the following way:

• The front elevation should be on the bottom-left.
• The end elevation should be to the right of the front elevation.
• The plan elevation should be above the front elevation.

Please see below for further guidance.