Step 1: Change from the 'Design' environment to the 'Manufacture' environment.

Step 2: Select the 'Setup' drop-down menu > Select 'New Setup'.

This will start the process of setting up the stock material and will open up a new window...

Step 3: Select the left corner of the top face of the stock - this is point the CNC router recognises as the home position.

In the window, select 'OK' to confirm your choice.

Please note: If your X, Y and Z axis are not oriented correctly, you may need to fix this.

Please go to the Setting Up The Stock - Fixing Any Problems page.

Step 4: From the top menu, select the '2D' drop-down menu and then select 'Bore'.

We will use this tool in the next step.

Step 5: With the bore tool still selected, click on the two 6.1mm holes.

Press 'OK' to confirm these selections. This will open a new window asking using to select a tool...

Step 6: Within the new window, select 'Sample Tools - Metric'.

Select 04mm (4mm Flat Endmill).

Select the 'Select' button to confirm your choice.

Step 7: To check your progress, from the top menu, select the 'Actions' drop-down menu and then select 'Simulate'.

We will run the simulation in the next step.

Step 8: To run the simulation, simply press the play button.

We can follow what will happen with the CNC router.

Step 9: From the top menu, select the '2D' drop-down menu and then select '2D Pocket'.

We will use this tool in the next step.

Step 10: With the '2D Pocket' tool still selected, click on the 3 recessed areas.

Within the pop-up window, select the 'passes' tab > Select the 'Multiple Depths' radial button > Change the 'Maximum Roughing Stepdown' distance to 1mm.

Press 'OK' to confirm these selections.

Step 11: To check your progress, from the top menu, select the 'Actions' drop-down menu and then select 'Simulate'.

To run the simulation, simply press the play button.

We can follow what will happen with the CNC router.

Step 12: Select the '2D' drop-down menu > Select '2D Contour'.

This will open a new 2D Contour menu.

Step 13: Select the '2D' drop-down menu > Select '2D Contour'.

With the '2D Contour' tool still selected, click on the outside edge of the bottom of the box.

Within the pop-up window, select the 'passes' tab > Select the 'Multiple Depths' radial button > Change the 'Maximum Roughing Stepdown' distance to 1mm.

Press 'OK' to confirm these selections.

Step 14: To check your progress, from the top menu, select the 'Actions' drop-down menu and then select 'Simulate'.

To run the simulation, simply press the play button.

We can follow what will happen with the CNC router.

Step 15: Select the 'Actions' drop-down menu > Select 'Post Process'.

This will open a new Post Process window.

Step 16: Within the Post Process window, select or enter the following:

Post: 'Eding CNC/USBCNC / eding'

Name: 'CNC Box'

Output Folder: 'D:/' (USB thumb drive)